new FR24 installation

[DL7PJ]

i have install today first time FR24 its work fine but
i connect other client but not work i see not plains but the sharing page fr24 say yes- i read forum and maunuals but not found information ?
whats wrong ?

Anmerkung 2019-11-17 204940.jpg

Anmerkung 2019-11-17 205834.jpg

Anmerkung 2019-11-17 205305.jpg

[abcd567]

SEE SCREENSHOT BELOW
In your browser, go to page IP-OF-PI:8754/settings.html

(1) In field "Process Arguments" add --net
(2) Select "NO" for fields "Raw data", "SBS Feed" and "Decoded data"

(3) After making above changes, in Planefinder settings, use port 30005, Beast


NOTE:
By default, the fr24feed's supplied dump1090-mutability v1.14 is blocked to output its data in various formats on specific ports.
By adding --net in process arguments, the dump1090 is unblocked, and starts outputting data on its default ports as follows:

pi@raspberrypi:~ $ cat /etc/default/dump1090-mutability
.... ....
.... ....
# Networking options
#

# Port to listen on for HTTP connections. 0 disables.
# HTTP defaults to being disabled unless you specify something here. I
# that you do not enable this, and instead serve the contents of
# /usr/share/dump1090-mutability and JSON_DIR (below) using a proper
# webserver. See /etc/lighttpd/conf-available/90-dump1090.conf
# for an example configuration ("sudo lighty-enable-mod dump1090" to enable)
HTTP_PORT="0"

# Port to listen on for raw (AVR-format) input connections. 0 disables.
RAW_INPUT_PORT="30001"

# Port to listen on for raw (AVR-format) output connections. 0 disables.
RAW_OUTPUT_PORT="30002"

# Port to listen on for SBS-format output connections. 0 disables.
SBS_OUTPUT_PORT="30003"

# Port to listen on for Beast-format input connections. 0 disables.
BEAST_INPUT_PORT="30004"

# Port to listen on for Beast-format output connections. 0 disables.
BEAST_OUTPUT_PORT="30005"

# Port to listen on for FATSV-format output connections. 0 disables.
FATSV_OUTPUT_PORT="10001"

Pi24 Settings-2.png

[DL7PJ]

Thanks a lot now everything works here.

Is there a possibility to see all planes I have received as a list?

[wiedehopf]

You mean a historical list? Otherwise just look at the live map.

Maybe this is something you would like https://github.com/wiedehopf/timelap...#timelapse1090
(you'll need to install dump1090-fa for the above to work: https://github.com/wiedehopf/adsb-sc...for-dump1090fa)

[DL7PJ]

Thank you, that's exactly what I need.
I will install it immediately and take it in operation.
thanks again for the great hint and the help

[DL7PJ]

work fine TNX !!!

Anmerkung 2019-11-18 182551.jpg

Anmerkung 2019-11-18 182605.jpg

[DL7PJ]

and Virtual Radar works fine

Anmerkung 2019-11-18 185120.jpg