Feed FR24 from Arch Linux Arm on Raspberry Pi

[abcd567]

After setting dump1090-mutability to start automatically (STEP-1), you had to reboot the Pi. Upon reboot the dump1090-mutability would have started. Alternatively...

[abcd567]

STEP-1: Make dump1090-mutability free to start on its own, and not be slave of fr24feed

sudo dpkg-reconfigure dump1090-mutability

...

[abcd567]

What you have purchased is good and enough to start.

Now write Pi24 image on the microSD Card, and you are done.
...

[abcd567]

ModeSMixer2 Installation Script at Github


Updated on February 23, 2021

Change log:
(1) The modesmixer2 is now run...

[abcd567]

Send an email to Prof. Dumbledore of Hogwarts, complining that he has sent you very naughty elves. ...

[abcd567]

May be dongle is gone bad. To check, give following commands and post output of last command.

sudo apt-get install rtl-sdr

...

[abcd567]

What is shown when you type following address in browser's address bar? Do you see map with planes?

192.168.0.23/dump1090/gmap.html ...

[abcd567]

Just fr24 feeder installed is enough, provided in settings you choose Receiver type DVB-T


...

[abcd567]

PLACEHOLDER

[abcd567]

PLACEHOLDER

[abcd567]

Type (or copy-paste) following address in a browser's address bar, and press Enter key:

192.168.1.86/dump1090/gmap.html

Do...

[abcd567]

Combining two antennas with this solid "T" will work, but with much reduce range/plane count....

[abcd567]

following workaround was suggested by FR24 about 2 years ago, as a solution to connection problem.
I am not sure if it would still help, but no...

[abcd567]

How To Install OS "AlarmPi" (Arch Linux arm for Pi) on microSD card of a Pi

Click Installation Tab on following pages:
...

[abcd567]

ADSB on "AlarmPi" (Arch Linux arm for Pi)

This guide shows how to install following on Raspberry Pi

1 - Operating...

[abcd567]

PI24 Settings

...