Announcement

Collapse
No announcement yet.

new FR24 installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DL7PJ
    replied
    and Virtual Radar works fine

    Anmerkung 2019-11-18 185120.jpg

    Leave a comment:


  • DL7PJ
    replied
    work fine TNX !!!

    Anmerkung 2019-11-18 182551.jpg

    Anmerkung 2019-11-18 182605.jpg

    Leave a comment:


  • DL7PJ
    replied
    Thank you, that's exactly what I need.
    I will install it immediately and take it in operation.
    thanks again for the great hint and the help

    Leave a comment:


  • wiedehopf
    replied
    You mean a historical list? Otherwise just look at the live map.

    Maybe this is something you would like https://github.com/wiedehopf/timelap...#timelapse1090
    (you'll need to install dump1090-fa for the above to work: https://github.com/wiedehopf/adsb-sc...for-dump1090fa)

    Leave a comment:


  • DL7PJ
    replied
    Thanks a lot now everything works here.

    Is there a possibility to see all planes I have received as a list?

    Leave a comment:


  • abcd567
    replied
    SEE SCREENSHOT BELOW
    In your browser, go to page IP-OF-PI:8754/settings.html

    (1) In field "Process Arguments" add --net
    (2) Select "NO" for fields "Raw data", "SBS Feed" and "Decoded data"

    (3) After making above changes, in Planefinder settings, use port 30005, Beast


    NOTE:
    By default, the fr24feed's supplied dump1090-mutability v1.14 is blocked to output its data in various formats on specific ports.
    By adding --net in process arguments, the dump1090 is unblocked, and starts outputting data on its default ports as follows:

    Code:
    pi@raspberrypi:~ $ cat /etc/default/dump1090-mutability
    .... ....
    .... ....
    # Networking options
    #
    
    # Port to listen on for HTTP connections. 0 disables.
    # HTTP defaults to being disabled unless you specify something here. I
    # that you do not enable this, and instead serve the contents of
    # /usr/share/dump1090-mutability and JSON_DIR (below) using a proper
    # webserver. See /etc/lighttpd/conf-available/90-dump1090.conf
    # for an example configuration ("sudo lighty-enable-mod dump1090" to enable)
    HTTP_PORT="0"
    
    # Port to listen on for raw (AVR-format) input connections. 0 disables.
    RAW_INPUT_PORT="30001"
    
    # Port to listen on for raw (AVR-format) output connections. 0 disables.
    RAW_OUTPUT_PORT="30002"
    
    # Port to listen on for SBS-format output connections. 0 disables.
    SBS_OUTPUT_PORT="30003"
    
    # Port to listen on for Beast-format input connections. 0 disables.
    BEAST_INPUT_PORT="30004"
    
    # Port to listen on for Beast-format output connections. 0 disables.
    BEAST_OUTPUT_PORT="30005"
    
    # Port to listen on for FATSV-format output connections. 0 disables.
    FATSV_OUTPUT_PORT="10001"



    Pi24 Settings-2.png
    Last edited by abcd567; 2019-11-17, 23:27.

    Leave a comment:


  • DL7PJ
    started a topic new FR24 installation

    new FR24 installation

    i have install today first time FR24 its work fine but
    i connect other client but not work i see not plains but the sharing page fr24 say yes- i read forum and maunuals but not found information ?
    whats wrong ?

    Anmerkung 2019-11-17 204940.jpg

    Anmerkung 2019-11-17 205834.jpg

    Anmerkung 2019-11-17 205305.jpg


Working...
X