Originally posted by Sam26K
View Post
Announcement
Collapse
No announcement yet.
FR24feed raspberry pi3 and FR24 feed windows - VERY interesting -
Collapse
X
-
TELNET from Windows Desktop to Raspberry Pi/dump1090-mutability at Local IP 192.168.0.21
Message Format at Port 30003 = Basestation (text)
Telnet 1 - RPi port 30003.png Telnet 2 - RPi port 30003.png
Message Format at Port 30005 = Beast (binary)
Telnet 3 - RPi port 30005.png Telnet 4 - RPi port 30005.png
Comment
-
TELNET from Windows Desktop to Raspberry Pi/dump1090-mutability at Local IP 192.168.0.21
Message Format at Port 30002 = AVR (hexadecimal)
Telnet 5 - RPi port 30002.png Telnet 6 - RPi port 30002.png
Comment
-
I think the Beast format is not the issue here, because i used Beast format as source at the time i start feeding. My first setup was a Windows Notebook with Windows feeder and my station appear often at my location. Since i moved to Pi i see my station only seven or eight times a week..........Best Regards
Volker
Comment
-
I have the same problem too. I have migrated to Raspberry Pi3. Based on the data feed it went well. My statistics are all ok. But unfortunately my Radar T-WMSA12 did not appear in the Radar Section. I'm from Malaysia and my ranking in Malaysia is around 30. Anybody else having the same problem too??
Comment
-
Originally posted by volkerjacob View Post[...]Since i moved to Pi i see my station only seven or eight times a week.Originally posted by atoi68 View PostI have migrated to Raspberry Pi3. [...] My statistics are all ok. But unfortunately my Radar T-WMSA12 did not appear in the Radar Section. [...] Anybody else having the same problem too?
My personal speculation for the now (with RPi feeder) very rare listing as "current" feeder - compared to past times when feeding from Windows - is, that this is a "side effect" when the feeder provides - now - also MLAT data (which I do).
I requested the FR24 team to publish some statements concerning MLAT issues here. Up to now, there is no answer.
Question: Do you NOW also provide MLAT data with your RPi?
Greetings from Germany, -Wolli-
Comment
-
Originally posted by Wolli View PostYep, me too -although I'm not certain that this is a "real" problem. It might be a problem seen with our - the voluntary feeders' - eyes. Most of us voluntary feeders IMHO feel some kind of happiness / satisfaction to see "our" feeder (T-******) being the "currently used radar". However, the FR24-"system" decides which radar to display as the "current" one.
My personal speculation for the now (with RPi feeder) very rare listing as "current" feeder - compared to past times when feeding from Windows - is, that this is a "side effect" when the feeder provides - now - also MLAT data (which I do).
I requested the FR24 team to publish some statements concerning MLAT issues here. Up to now, there is no answer.
Question: Do you NOW also provide MLAT data with your RPi?
Greetings from Germany, -Wolli-
Comment
-
Originally posted by BZK View PostNo, your problem isn't related to the MLAT.
Originally posted by BZK View PostI have tried to feed with and without MLAT with the same results. Also your feed quality (with Raspberry) is not considerated. I am in 5-6 position top on the rank for Italy and be the only T in this place.
Originally posted by BZK View PostThe question, in my opinion, is that FR24 enable for spotting, if available, only F radar.
Let's wait for some more postings / answers to this issue, agree? Ciao and greetings from Germany to Italy, -Wolli-Last edited by Wolli; 2016-12-12, 19:57.
Comment
-
Hi Wolli, I have sent several mail to FR24 support to clarify WHY with win feeder (old) I am every time spotted while with RPI not or one/two time a day. Answer from support where generic and NEVER related to data format. To solve definitively the question i feed BOTH data format, mlat enabled on RPI. If I shut down the win feeder and keep ON only RPI I am NOT MORE spotted even if I am today on rank 5 of more than 250 of italian feeder.
Definitively I think that the data format can be the problem, even if not confirmed from support. Maybe that the F feeder send data with old win format and are with high priority respect the RPI feeding. Maybe.Last edited by BZK; 2016-12-13, 16:43.
Comment
Comment