Cool...... so just to ignore step 3 ?
Announcement
Collapse
No announcement yet.
How to Install dump1090-mutability on RPi
Collapse
X
-
Originally posted by ramimz View PostCool...... so just to ignore step 3 ?
But note there was 2 methods - you took the long one 1st one would have worked with it pre-compiled
I've made the note to make NOT BUSTER clear. But the 1st option was always the preferred (which is why abcd edited it in June)Posts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
-
And replace step 4 with the install command mentioned.
Try if it works, i'm not 100 % sure.
If the install works, then you don't need steps 3 and 4.
Anyway if you have anymore trouble i would just recommend the bundle i linked.
It has both the old style dump1090 map and the newer dump1090-fa style map.
Also it will automatically adjust the gain.
Comment
-
Thanks Oblivian & wiedehopf
so that's what i did on method-2 by abcd567
step 1....as is
step 2....as is
step 3....pass
step 4....replaced with the command "sudo apt install dump1090-mutability" by wiedehopf
step 5....as is
step 6....as is
step 7....I normally pass that one
step 8....as is
step 9....I normally pass that one
step 10...as is
so far it's working great
Comment
-
[S O L V E D ]
Workaround for Raspbian Buster
The problem is caused because Buster's Apt installs latest versions of packages librtlsdr-dev and librtlsdr0.
The dump1090-mutability code has not been upgraded yet to use these latest versions and fails.
The solution is that in First Post's STEP (1), remove from 2nd "apt-get install" line the package "librtlsdr-dev", and instead download and install older version from Debian package repository, as shown in (2) below.
If you already have run the STEP (1) of First Post, then do (1) below to purge newly installed packages from Buster repository.
(1) Purge librtlsdr-dev (0.6-1+rpt1) and librtlsdr0 (0.6-1+rpt1) installed from Buster's apt during execution of STEP (1) of First Post
Code:sudo apt purge librtlsdr-dev sudo apt purge librtlsdr0
Code:wget -O ~/librtlsdr0_0.5.3-11+b2_armhf.deb "http://ftp.us.debian.org/debian/pool/main/r/rtl-sdr/librtlsdr0_0.5.3-11+b2_armhf.deb" sudo dpkg -i librtlsdr0_0.5.3-11+b2_armhf.deb wget -O ~/librtlsdr-dev_0.5.3-11+b2_armhf.deb "http://ftp.us.debian.org/debian/pool/main/r/rtl-sdr/librtlsdr-dev_0.5.3-11+b2_armhf.deb" sudo dpkg -i librtlsdr-dev_0.5.3-11+b2_armhf.deb
Code:~/build-dump-mut/dump1090 sudo dpkg-buildpackage -b cd ../ sudo dpkg -i dump1090-mutability_1.15~dev_armhf.deb sudo wget -O /etc/udev/rules.d/rtl-sdr.rules "https://raw.githubusercontent.com/osmocom/rtl-sdr/master/rtl-sdr.rules" sudo dpkg-reconfigure dump1090-mutability sudo reboot
Last edited by abcd567; 2019-07-17, 15:15.
Comment
-
For details, please see following
(1) Thread I created on June 30, 2019:
Dump1090-mutability ver 1.15~dev package now available in Repository!
(2) Buster workaround I posted on July 9, 2019:
[S O L V E D]
Last edited by abcd567; 2019-07-17, 15:34.
Comment
-
Originally posted by ramimz View Postbecause he gave me an error when i try to install "READ & SET GAIN FROM BROWSER / DUMP1090 MAP"
and after reboot, it was stuck in home screen, and not loading the OS.
now i finished step 10 without any problem
I have tested it, works ok.
You can now install it.
Comment
-
I don't feel like debugging the problem right now, if you want something that will in 99% of case work out of the box, use this, it does most stuff automatically:
What system are you on anyway? This command will answer it:
cat /etc/os-release | grep PRETTY
Comment
-
-
Looks like dump1090-mutability is just not running.
But you should get that empty page on every computer (Ctrl-F5 might be required).
Oh right then.
This will tell you which version is actually installed:
dump1090-mutability --help 2>&1 | head -n4
You have tried rebooting?
I'm not exactly sure how this version works in regards to fr24feed.ini settings.
Let's see it so i know what's going on:
cat /etc/fr24feed.ini
Comment
Comment