FR24 server disconnected , could not connect

[pilax]

Is there a way to change server IP ?

How do you contact support ?

[wiedehopf]

No, this is probably a server problem.

Or a problem of the internet infrastructure between that particular fr24 server and your provider.

It working for me likely just means that i get connected to another one of the fr24 servers or my data takes a different path.

[Rueganer91]

the support reply , he checked they server and mean it´s all okey keyy ....

i have a Laptop with configured feeder , even this one can not connect to the server! So it will not be up to us if so many users have problems since this morning

I hope the problem will be solved shortly

[F1JEK]

"185.218.24.23 is not responding"

[F1JEK]

Same here in France since 11 this morning.

[GeneralChef]

Same for me since 3 hours.
Some things are strange today :
[ATTACH=CONFIG]10254[/ATTACH]

Hello

Same thing here for me in France.

S/W VERSION: FR24-3.8,101,66
F/W VERSION: 22
ROOT DEVICE: /dev/mmcblk0p2
RADAR CODE: F-LFHS1
UPTIME: 0 days 00:08:54

FR24 CONNECTION STATUS:
ADS-B: failure
ModeS: down

I rebooted the FR24 Receiver but no change.

[viret]

same here for about two hours .
a known problem ?
no change at my conf...

fr24feed status ################################################## #####################
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2019-02-13 15:16:23.
[FAIL] FR24 Link: connecting ... failed!
[ ok ] Receiver: connected (27803 MSGS/0 SYNC).
[FAIL] FR24 MLAT: not running ... failed!
fr24feed status ################################################## #####################

Same for me since 3 hours.
Some things are strange today :
Selection_035.png

[Rueganer91]

i think , this server is down ! here a older forum post of this same problem https://forum.flightradar24.com/thre...k-Disconnected

I contact the support for a solution i report

[pilax]

same here for about two hours .
a known problem ?
no change at my conf...

fr24feed status ################################################## #####################
[ ok ] FR24 Feeder/Decoder Process: running.
[ ok ] FR24 Stats Timestamp: 2019-02-13 15:16:23.
[FAIL] FR24 Link: connecting ... failed!
[ ok ] Receiver: connected (27803 MSGS/0 SYNC).
[FAIL] FR24 MLAT: not running ... failed!
fr24feed status ################################################## #####################

[wiedehopf]

As i said there have been problems before, and the above options i mentioned seem to be more reliable.

[Rueganer91]

interessting find i , my data was uploadet a short time ... i think , the internet of the server have problems ? Projekt5.jpg

[wiedehopf]

You can add

use-http=yes
http-timeout=20

to /etc/fr24feed.ini on your RPi.

That normally works more reliable than the default configuration.

[Rueganer91]

thank you for your help I keep watching

It's working fine for me, even with IPv6 enabled and also without the usual use-http config option i normally use.

Maybe reboot the raspberry pi and show the output of:

sudo cat /var/log/fr24feed/fr24feed.log

Not sure what the problem is, the internet in Europe seems to be having some routing problems the last couple of days, so maybe it is connected to that.

[wiedehopf]

It's working fine for me, even with IPv6 enabled and also without the usual use-http config option i normally use.

Maybe reboot the raspberry pi and show the output of:

sudo cat /var/log/fr24feed/fr24feed.log

Not sure what the problem is, the internet in Europe seems to be having some routing problems the last couple of days, so maybe it is connected to that.

[Rueganer91]

Hi Guys

i have today a problem with my two fr24feed (one Windows feed and one Raspberry Pi Feed)

both feeders at the same time (1030 lcl Berlin/Germany) don´t share data to fr24 server , both feeders connection sucessfull to receiver . I have not adjusted or the same, before it worked great
Is this a server problem ???


the windows feed says ,, Error : could not connect feed ! (result-1,fd -1)
waiting 7 seconds ,,

on localhost:8754 show fr24 feed me this information
FR24 Link : disconnected
FR24 Radar Code : T-EDCG2
Aircraft Tracked Mode S & ADS-B : 22
Reveiver : avr-rcp . connected
MLAT running : N/A


the rapsi feed says :
bind function failed erno 98

here is the receiver sucessfull working !

At both worked planefinder good !



i have updatet the raspi and windows feed for the newest version ... have fr24feed server problems ?