Automated Installation of Dump1090-Mutability, Data Feeders, and Performance Graphs

[abcd567]

alternative?

No alternative for Web Portal
Install graphs using this script by Wiedehopf

sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/graphs1090/master/install.sh)"

See the graphs in browser at this address:
192.168.0.21/graphs1090
(replace 192.168.0.21 by your Pi's actual Local IP)

Instructions are here:
https://github.com/wiedehopf/graphs1...ster/README.md


.

[Conan_89]

alternative?

[abcd567]

The "Adsb receiver project" for which this thread was started is no more being maintained by its author J Prochazka for a long time. Please do not use this.

[Conan_89]

Since I have set up my Pi, no new flights have been added to the flights database, knows the problem jeand and could help me to fix it?

[abcd567]

MikeyMoMo:

The script in first post has issues, as it is not regularly maintained by the author J Prochazka.

If you have RPi, use the item "2 - Download and Install PiAware" on this page:

https://flightaware.com/adsb/piaware/install

[MikeyMoMo]

The Piaware install failed with the messages:

Installing the FlightAware PiAware client package...

dpkg: error: cannot access archive '/home/pi/adsb-receiver/build/piaware_builder/piaware_*.deb': No such file or directory

Checking that the FlightAware PiAware client package was installed properly...

INSTALLATION HALTED!
UNABLE TO INSTALL A REQUIRED PACKAGE.
SETUP HAS BEEN TERMINATED!

The package "piaware" could not be installed.

------------------------------------------------------------------------------
FlightAware PiAware client setup halted.

Press enter to continue...

[MikeyMoMo]

I had the same problem as in #170. I backed off and installed Dump1090-mutability by using apt and then reran the install.sh. I did NOT select the second offer to install mutability. It asked even though it had already told me that it was installed. Then it ran to completion without that missing .deb file message and started installing the feeders.

[IZ8292SWL]

This is really the wrong thread for this question, this is: https://forum.flightradar24.com/thre...1090-et-cetera

The system stats assume a Raspberry Pi system for the most part.
Please show the logs for graphs1090 as described here https://github.com/wiedehopf/adsb-wi...Debug-commands
And put the answer in the other appropriate thread.

Ok, take a look at my new post there and thanks in advance

[wiedehopf]

This is really the wrong thread for this question, this is: https://forum.flightradar24.com/thre...1090-et-cetera

The system stats assume a Raspberry Pi system for the most part.
Please show the logs for graphs1090 as described here https://github.com/wiedehopf/adsb-wi...Debug-commands
And put the answer in the other appropriate thread.

[IZ8292SWL]

IZ8292SWL:
Using the script in the first post of this thread to install graphs one has to installs web portal. The web portal includs PHP, MySQL and Graphs. This is unnecessary and is buggy.

Recently wiedehopf has written a script which installs "graph-only", no PHP, no MySQL, and no web portal. It can be installed very easily by copy-pasting the following script in your SSH console. I strongly recomment this for installing graphs.

sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/graphs1090/master/install.sh)"

For details see this page: https://github.com/wiedehopf/graphs1...ster/README.md

Hi!
I'm using Graphs1090 and it's a great tool! But don't get any system stats, only ADSB data (the most importnat thing anyway...).
Is there something i can do?
I already tried to update the application using the method described in the Github page.

[abcd567]

IZ8292SWL:
Using the script in the first post of this thread to install graphs one has to installs web portal. The web portal includs PHP, MySQL and Graphs. This is unnecessary and is buggy.

Recently wiedehopf has written a script which installs "graph-only", no PHP, no MySQL, and no web portal. It can be installed very easily by copy-pasting the following script in your SSH console. I strongly recomment this for installing graphs.

sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/graphs1090/master/install.sh)"

For details see this page: https://github.com/wiedehopf/graphs1...ster/README.md

[abcd567]

Think you forgot probably one of the most important aspects: Antenna location / location.

Yes location/antenna location is very important, but he asked about hardware

But i mean, the hardware behind.
Antenna? Filter? Etc

[wiedehopf]

Think you forgot probably one of the most important aspects: Antenna location / location.

[abcd567]

IZ8292SWL:

The results plotted in the form of graphs are combined performance of:

Antenna + Coax cable + Filter + LNA + DVB-T + Gain Setting

[IZ8292SWL]

IZ8292SWL:

RRDTOOL + COLLECTD

Thanks!
But i mean, the hardware behind.
Antenna? Filter? Etc