Since it was a new install, I tried again from scratch and followed the awesome and very easy to follow tutorial here by
forum.flightradar24.com/threads/10232-How-to-Install-dump1090-mutability_1-15-dev-on-RPi
Now it all works just fine. Thank you so much for that.
Announcement
Collapse
No announcement yet.
[FAIL] Receiver: down ... failed!
Collapse
X
-
[FAIL] Receiver: down ... failed!
Hi
I am a total newbi to Raspberry Pi.
After seeing a webpage describing how easy it is to feed data, I bought a 3B+ and a RTL-SDR V3-based kit. I setup the Pi with a new install, updated the system with sudo apt-get update and sudo apt-get upgrade-dist.
I then ran the command
Code:sudo bash -c "$(wget -O - hxxp://repo.feed.flightradar24.com/install_fr24_rpi.sh)"
I can access the webpage on the ip-address:8754 but it does not feed any aircraft.
At first I checked for the fr24feed-status and get the following result:
Code:pi@raspberrypi:~ $ fr24feed-status [ ok ] FR24 Feeder/Decoder Process: running. [ ok ] FR24 Stats Timestamp: 2019-08-10 12:19:18. [ ok ] FR24 Link: connected [UDP]. [ ok ] FR24 Radar: T-VHHH169. [ ok ] FR24 Tracked AC:. [FAIL] Receiver: down ... failed! [FAIL] FR24 MLAT: not running ... failed!
Code:pi@raspberrypi:~ $ sudo systemctl stop fr24feed pi@raspberrypi:~ $ sudo systemctl stop dump1090-mutability pi@raspberrypi:~ $ rtl_test -t Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000001 Using device 0: Generic RTL2832U OEM Found Rafael Micro R820T tuner Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6 [R82XX] PLL not locked! Sampling at 2048000 S/s. No E4000 tuner found, aborting.
Code:pi@raspberrypi:~ $ sudo systemctl start dump1090-mutability pi@raspberrypi:~ $ sudo fr24feed 2019-08-10 20:20:44 | ______ _ _ _ _ _ _____ ___ 2019-08-10 20:20:44 | | ___|| |(_) | | | | | | / __ \ / | 2019-08-10 20:20:44 | | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| | 2019-08-10 20:20:44 | | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| | 2019-08-10 20:20:44 | | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ | 2019-08-10 20:20:44 | \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/ 2019-08-10 20:20:44 | __/ | 2019-08-10 20:20:44 | |___/ 2019-08-10 20:20:44 | [main][i]FR24 Feeder/Decoder 2019-08-10 20:20:44 | [main][i]Version: 1.0.23-8/generic 2019-08-10 20:20:44 | [main][i]Built on Oct 16 2018 08:10:47 (HEAD-2d57e58.git/Linux/static_armel) 2019-08-10 20:20:44 | [main][i]Running on: raspbian10 2019-08-10 20:20:44 | [main][i]Local IP(s): 192.168.5.59 2019-08-10 20:20:44 | [main][i]Copyright 2012-2018 Flightradar24 AB 2019-08-10 20:20:44 | [main][i]DNS mode: PING 2019-08-10 20:20:44 | [main][i]Automatic updates are ENABLED 2019-08-10 20:20:44 | ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded 2019-08-10 20:20:44 | [httpd][i]Server started, listening on 0.0.0.0:8754 2019-08-10 20:20:44 | [main][i]Reader thread started 2019-08-10 20:20:44 | [reader][i]Initializing reader 2019-08-10 20:20:44 | [main][i]MLAT data feed started 2019-08-10 20:20:44 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:20:44 | [master][i]Starting processing thread 2019-08-10 20:20:44 | [mlat][i]Waiting for MLAT configuration 2019-08-10 20:20:44 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:20:44 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:20:44 | [reader][i]Connection terminated 2019-08-10 20:20:44 | [main][i]Terminating child process 1317 with SIGTERM 2019-08-10 20:20:45 | [time][i]Synchronizing time via NTP 2019-08-10 20:20:50 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:20:50 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:20:50 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:20:50 | [reader][i]Connection terminated 2019-08-10 20:20:50 | [main][i]Terminating child process 1327 with SIGTERM ... bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:21:34 | [reader][i]Connection terminated 2019-08-10 20:21:34 | [main][i]Terminating child process 1366 with SIGTERM 2019-08-10 20:21:35 | [feed][i]configuring decoder 2019-08-10 20:21:35 | [feed][c]Max range AIR: 350.0nm 2019-08-10 20:21:35 | [feed][c]Max range GND: 100.0nm 2019-08-10 20:21:35 | [feed][i]configuration changed 2019-08-10 20:21:35 | [feed][i]defined 3 servers 2019-08-10 20:21:35 | [feed][c]Timestamps: optional 2019-08-10 20:21:35 | [feed][n]VHHXXNNN@185.xx.xx.xx:8099/UDP 2019-08-10 20:21:35 | [stats][i]Stats thread started 2019-08-10 20:21:35 | [feed][n]connecting 2019-08-10 20:21:36 | info | Stopping ReceiverACSender threads for feed 2019-08-10 20:21:36 | info | Configured ReceiverACSender: 185.xx.xx.xx:8099,185.xx.xx.xx:8099,185.xx.xx.xx:8099, feed: VHHXXNNN, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true 2019-08-10 20:21:36 | info | Network thread connecting to 185.xx.xx.xx:8099 for feed VHHXXNNN 2019-08-10 20:21:36 | [feed][n]connected via UDP (fd 14) 2019-08-10 20:21:36 | [feed][i]Feed connected 2019-08-10 20:21:36 | [feed][n]working ... 2019-08-10 20:22:18 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:22:18 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:22:18 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:22:18 | [reader][i]Connection terminated 2019-08-10 20:22:18 | [main][i]Terminating child process 1377 with SIGTERM 2019-08-10 20:22:23 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:22:23 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:22:23 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:22:23 | [reader][i]Connection terminated 2019-08-10 20:22:23 | [main][i]Terminating child process 1378 with SIGTERM ^C2019-08-10 20:22:24 | [main][i]Terminating on user request 2019-08-10 20:22:24 | [main][i]Terminating worker threads 2019-08-10 20:22:24 | [reader][i]Terminating on request 2019-08-10 20:22:24 | [master][i]Terminating on request 2019-08-10 20:22:24 | [feed][x]Feeding thread terminated 2019-08-10 20:22:24 | [feed][n]busy 2019-08-10 20:22:24 | [feed][i]Feed disconnected 2019-08-10 20:22:24 | [feed][n]disconnected 2019-08-10 20:22:24 | info | Stopping ReceiverACSender threads for feed VHHXXNNN 2019-08-10 20:22:24 | warning | Exited network thread for feed VHHXXNNN 2019-08-10 20:22:24 | info | Joined network thread for feed VHHXXNNN 2019-08-10 20:22:26 | [httpd][d]Master thread terminated 2019-08-10 20:22:26 | [main][i]Terminated successfully
Code:pi@raspberrypi:~ $ sudo systemctl start fr24feed Job for fr24feed.service failed because the control process exited with error code. See "systemctl status fr24feed.service" and "journalctl -xe" for details.
Code:pi@raspberrypi:~ $ systemctl status fr24feed.service ● fr24feed.service - Flightradar24 Decoder & Feeder Loaded: loaded (/etc/systemd/system/fr24feed.service; enabled; vendor preset: enabled) Active: activating (start-pre) since Sat 2019-08-10 20:23:11 HKT; 18s ago Cntrl PID: 1805 (install_dump109) Tasks: 4 (limit: 1604) Memory: 68.9M CGroup: /system.slice/fr24feed.service Aug 10 20:23:11 raspberrypi systemd[1]: Starting Flightradar24 Decoder & Feeder... Aug 10 20:23:30 raspberrypi systemd[1]: fr24feed.service: Control process exited, code=exited Aug 10 20:23:30 raspberrypi systemd[1]: fr24feed.service: Failed with result 'exit-code'. Aug 10 20:23:30 raspberrypi systemd[1]: Failed to start Flightradar24 Decoder & Feeder. pi@raspberrypi:~ $ journalctl -xe -- Subject: Automatic restarting of a unit has been scheduled -- Defined-By: systemd -- -- Automatic restarting of the unit fr24feed.service has been scheduled, as the result for -- the configured Restart= setting for the unit. Aug 10 20:23:31 raspberrypi systemd[1]: Stopped Flightradar24 Decoder & Feeder. -- Subject: A stop job for unit fr24feed.service has finished -- Defined-By: systemd -- -- A stop job for unit fr24feed.service has finished. -- -- The job identifier is 1300 and the job result is done. Aug 10 20:23:31 raspberrypi systemd[1]: Starting Flightradar24 Decoder & Feeder... -- Subject: A start job for unit fr24feed.service has begun execution -- Defined-By: systemd -- -- A start job for unit fr24feed.service has begun execution. -- -- The job identifier is 1300. Aug 10 20:23:46 raspberrypi systemd[1]: Reloading. pi@raspberrypi:~ $
How can I fix this to connect to the receiver? Thanks a lot for your help.Tags: None
Leave a comment: