Announcement

Collapse
No announcement yet.

different distance flightradar24 <-> flightaware

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    in your browser go to ip of your rpi and port 8754. something like this http://192.168.1.5:8754/index.html
    For official support use Contact Form

    Comment


    • #17
      The FA range looks almost the same like your FR24 range Antonov
      Regards,
      T-EDDE7

      Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
      Banana Pi | Mystique SDR R820T2 | stock Antenna

      Comment


      • #18
        Thanks, Amper. Still learning . Don't want to branch off from the OP's post but return from port 8754 is blank. Maybe security settings? Using Chrome browser. It didn't ask for a Pi password or anything and I'm not logged onto the Pi.
        Also, I thought the Pi fr24feed for MLAT was still not working yet?
        Attached Files

        Comment


        • #19
          Press F5 to reload the Page, the display is sometimes broken and you have to load the page 2 or 3 times to see something
          Regards,
          T-EDDE7

          Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
          Banana Pi | Mystique SDR R820T2 | stock Antenna

          Comment


          • #20
            Just hit F5 on your keyboard couple of times to refresh page and info will show up.
            Mlat is not used by FR24 yet but active in your setup
            For official support use Contact Form

            Comment


            • #21
              Originally posted by Amper View Post
              Just hit F5 on your keyboard couple of times to refresh page and info will show up.
              Mlat is not used by FR24 yet but active in your setup
              Yes, that worked! Thanks! It shows that MLAT is "running" for me too and am absolutely certain that I'm not a FR24 MLAT leaker as it's the only feed I have right now.
              Attached Files

              Comment


              • #22
                ac_map_size="3072"
                build_arch="armv7l"
                build_flavour="generic"
                build_os="Linux"
                build_revision="HEAD-7ec40a3.git"
                build_timetamp="Feb 19 2016 13:35:49"
                build_version="1.0.17-5" <--- latest beta


                okay 180nm max range in this stats good
                T-EDDC51
                Radarcape ( 171213.1000.02D) | 1090MHz ADS-B Filtered Preamp | LNA4ALL | ADS-B Collinear 5/8 Antenna

                Comment


                • #23
                  Originally posted by equi View Post
                  The FA range looks almost the same like your FR24 range Antonov
                  mhhh unterschied miles und nautische miles ?
                  T-EDDC51
                  Radarcape ( 171213.1000.02D) | 1090MHz ADS-B Filtered Preamp | LNA4ALL | ADS-B Collinear 5/8 Antenna

                  Comment


                  • #24
                    Originally posted by John-h View Post
                    Hi,
                    Your dump1090 can receive Mode-S signal up to 238Km far from your antenna. However, fr24feed reject data from your received signal.
                    I guess it becomes reason of data accuracy for FR24. FR24feed should reject non-continuous position data like as one shot position data from far end of receiver range.
                    Based on my estimation, to accept position report data by FR24, position data is required to continues 20 seconds of duration average.
                    one-shot or few times of position data set for one-aircraft should rejected by fr24feed or fr24 server center.
                    Yes that sounds logical
                    T-EDDC51
                    Radarcape ( 171213.1000.02D) | 1090MHz ADS-B Filtered Preamp | LNA4ALL | ADS-B Collinear 5/8 Antenna

                    Comment


                    • #25
                      Originally posted by antonov_124 View Post
                      mhhh unterschied miles und nautische miles ?
                      And I thought that FA is using nautical miles,too...
                      Regards,
                      T-EDDE7

                      Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
                      Banana Pi | Mystique SDR R820T2 | stock Antenna

                      Comment


                      • #26
                        FR24 stats for range are in nautical miles. I use Virtual Radar Server to track my range and it's very close to the stats shown on the account page.
                        Last edited by Sam26K; 2016-02-26, 06:54.

                        Comment


                        • #27
                          Originally posted by antonov_124 View Post
                          ac_map_size="3072"
                          build_arch="armv7l"
                          build_flavour="generic"
                          build_os="Linux"
                          build_revision="HEAD-7ec40a3.git"
                          build_timetamp="Feb 19 2016 13:35:49"
                          build_version="1.0.17-5" <--- latest beta


                          okay 180nm max range in this stats good
                          How do you generate that info?

                          Comment


                          • #28
                            Originally posted by Sam26K View Post
                            How do you generate that info?
                            I suggest you try clicking some links on the page you already asked about earlier

                            Hi I have a question, here on the Flightradar24 side I have now a distance 112mi. But I also feed to flightaware - distance of 5-6 Views 150-200 mi. Why the difference? Can anyone explain to me? stats here: de.flightaware.com/adsb/stats/user/antonov124 flightradar24 stats: Uptime (as % of available time): 100% Aircraft
                            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                            Comment


                            • #29
                              Originally posted by Sam26K View Post
                              How do you generate that info?
                              click :



                              ;o)
                              T-EDDC51
                              Radarcape ( 171213.1000.02D) | 1090MHz ADS-B Filtered Preamp | LNA4ALL | ADS-B Collinear 5/8 Antenna

                              Comment


                              • #30
                                here is my range:

                                67cjeopx.png
                                T-EDDC51
                                Radarcape ( 171213.1000.02D) | 1090MHz ADS-B Filtered Preamp | LNA4ALL | ADS-B Collinear 5/8 Antenna

                                Comment

                                Working...
                                X