Hi
I'm getting time sync errors in my fr24feed.log file which look like
2016-02-03 09:43:34 | ERROR: time drift is 1454260023 seconds, resetting dump1090 start time[feed][i]sent 18 AC in 1 packet
The time drift number is different each time and there are normally more than one per line
However, my RPi is correct to the nearest millisecond and not 46 years out like the log suggests
Here are the status flags from fr24
ac_map_size="3072"
build_arch="armv7l"
build_flavour="generic"
build_os="Linux"
build_revision="HEAD-796dd01.git"
build_timetamp="20160128-1017"
build_version="1.0.16-11"
cfg_baudrate=""
cfg_bs="yes"
cfg_host="192.168.0.253:30002"
cfg_mpx=""
cfg_path=""
cfg_raw="yes"
cfg_receiver="avr-tcp"
cfg_windowmode="0"
d11_map_size="26"
feed_alias="T-EGPD7"
feed_current_mode="UDP"
feed_current_server="83.140.21.66"
feed_last_ac_sent_num="14"
feed_last_ac_sent_time="1454493076"
feed_last_attempt_time="1454492765"
feed_last_config_attempt="1454492765"
feed_last_config_info=""
feed_last_config_result="success"
feed_last_connected_time="1454492785"
feed_num_ac_tracked="18"
feed_status="connected"
feed_status_message=""
gps_tods="0"
last_json_utc="1454493010"
last_rx_connect_status="OK"
last_rx_connect_time="1454492762"
last_rx_connect_time_s="2016-02-03 09:46:02"
local_tods="35472"
msg_ring_full="0"
msg_ring_length="0"
num_messages="37316"
num_resyncs="0"
offline-mode="no"
rx_connected="1"
shutdown="no"
time_update_utc="1454493073"
time_update_utc_s="2016-02-03 09:51:13"
timing_is_valid="1"
timing_last_drift="+0.0005"
timing_last_offset="+0.0005"
timing_last_result="success"
timing_source="NTP"
timing_time_last_attempt="1454492765"
timing_time_last_success="1454492765"
timing_time_since_last_success="1454492765"
Notice the drift and offset flags
timing_last_drift="+0.0005"
timing_last_offset="+0.0005"
Which do not equate to ERROR: time drift is 1454260023 seconds
I've done the usual, reboot and shutdown completely then turn back on and nothing changes.
I'm getting time sync errors in my fr24feed.log file which look like
2016-02-03 09:43:34 | ERROR: time drift is 1454260023 seconds, resetting dump1090 start time[feed][i]sent 18 AC in 1 packet
The time drift number is different each time and there are normally more than one per line
However, my RPi is correct to the nearest millisecond and not 46 years out like the log suggests
Here are the status flags from fr24
ac_map_size="3072"
build_arch="armv7l"
build_flavour="generic"
build_os="Linux"
build_revision="HEAD-796dd01.git"
build_timetamp="20160128-1017"
build_version="1.0.16-11"
cfg_baudrate=""
cfg_bs="yes"
cfg_host="192.168.0.253:30002"
cfg_mpx=""
cfg_path=""
cfg_raw="yes"
cfg_receiver="avr-tcp"
cfg_windowmode="0"
d11_map_size="26"
feed_alias="T-EGPD7"
feed_current_mode="UDP"
feed_current_server="83.140.21.66"
feed_last_ac_sent_num="14"
feed_last_ac_sent_time="1454493076"
feed_last_attempt_time="1454492765"
feed_last_config_attempt="1454492765"
feed_last_config_info=""
feed_last_config_result="success"
feed_last_connected_time="1454492785"
feed_num_ac_tracked="18"
feed_status="connected"
feed_status_message=""
gps_tods="0"
last_json_utc="1454493010"
last_rx_connect_status="OK"
last_rx_connect_time="1454492762"
last_rx_connect_time_s="2016-02-03 09:46:02"
local_tods="35472"
msg_ring_full="0"
msg_ring_length="0"
num_messages="37316"
num_resyncs="0"
offline-mode="no"
rx_connected="1"
shutdown="no"
time_update_utc="1454493073"
time_update_utc_s="2016-02-03 09:51:13"
timing_is_valid="1"
timing_last_drift="+0.0005"
timing_last_offset="+0.0005"
timing_last_result="success"
timing_source="NTP"
timing_time_last_attempt="1454492765"
timing_time_last_success="1454492765"
timing_time_since_last_success="1454492765"
Notice the drift and offset flags
timing_last_drift="+0.0005"
timing_last_offset="+0.0005"
Which do not equate to ERROR: time drift is 1454260023 seconds
I've done the usual, reboot and shutdown completely then turn back on and nothing changes.
Comment