Results 1 to 6 of 6

Thread: Newbie: Aircraft tracked 0

  1. #1
    Passenger
    Join Date
    Dec 2015
    Posts
    1

    Newbie: Aircraft tracked 0

    Good evening,

    I was glad to get my DVBT-receiver today. I downloaded and installed the latest Windows-software with no problems. FR24 says this:

    Flightradar24 Feeder/Decoder
    Windows/generic/i386/1.0.15-7
    Updated: 22:29:06 GMT+0100

    FR24 Link: Connected via UDP
    FR24 Radar Code: T-EDDS103
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: N/A

    It is running since several hours. "aircraft tracked:0" is the point which bothers me.

    Any idea of helping a newbie? Thanks a lot.

    edds103

  2. #2
    Passenger
    Join Date
    Dec 2015
    Posts
    5
    Hi Edds ,

    I'm not sure why you are not showing "Aircraft Tracked:0" but you send me a PM I would be more than happy to help you workout what the problem might be.

    James

  3. #3
    Passenger
    Join Date
    Jul 2016
    Posts
    2
    Hello!

    I have the same problem. Dump1090 detects aircrafts but in FR24Feed says this:

    FR24 Link: Connected via TCP
    FR24 Radar Code: T-LPFR2
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: NO

    I am running FR24Feed and Dump1090 on a Raspberry Pi. Thanks in advance.

    Ricardo Gomes

  4. #4
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,027
    Quote Originally Posted by rsgomes View Post
    Hello!

    I have the same problem. Dump1090 detects aircrafts but in FR24Feed says this:

    FR24 Link: Connected via TCP
    FR24 Radar Code: T-LPFR2
    Aircraft Tracked (ModeS & ADS-B): 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: NO

    I am running FR24Feed and Dump1090 on a Raspberry Pi. Thanks in advance.

    Ricardo Gomes
    How do you know Dump1090 sees them?. And what is the feeder configured for?.

    If you have Dump1090 already running, feeder needs to be configured for AVRTCP 30002 NOT DVBT or otherwise.

    Config examples and other detection methods here http://forum.flightradar24.com/threa...-FAQs-and-Info
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  5. #5
    Passenger
    Join Date
    Jul 2016
    Posts
    2
    I know that Dump1090 sees them by the Local IP Address (192.168.1.122) and the Dump1090 port (8080).

    Now I change the configs on feeder to "AVR-TCP" and now it's running! Thanks a lot Obvilian for your fast reply. Best regards.

    Ricardo Gomes

  6. #6
    Passenger Lincolnshire Poacher's Avatar
    Join Date
    May 2016
    Location
    North Lincolnshire,England
    Posts
    47
    These are the settings for my PI if they are of any use.

    fr24.jpg
    T-EGNJ48 Raspberry Pi3, Flightaware yellow stick/filter and Radar-Rama antenna
    Based in North Lincolnshire England

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •