Hi Flightradar 24 Forum users,
I am a very long time daily user and ADSB submitter of Flightradar 24 and wanted to share some of my recent work regarding the use of Docker and a Raspberry Pi to allow full configuration and submitting to the Flightradar, Planefinder and Flightaware in under an hour.
Then I noted above....
"IMPORTANT NOTICE! In order to protect forum from spam robots, please don't include any links in your first 3 posts that you make on the forum, as your post will automatically be deleted."
As a first time poster to this forum, I'll have to elaborate a bit more without providing links.
Although hoping to follow up this post with some information that would help.
Before starting with my process the following is required:
1. A Raspberry Pi (preferably 2)
2. An empty micro SD card (16GB or more, class 10 preferred)
3. An RTL-SDR dongle with antenna
4. A small amount of time with almost no technical knowledge required
I have spent a lot of time on my own Pi, but wanted to create a process that would:
a) allow me to configure additional Pi's quickly and easily
b) a process that could be altered slightly for different GPS locations
Hoping to post more rather than leave everyone hanging....
In the meantime, please refer to the Hypriot OS website and I'll post shortly
I am a very long time daily user and ADSB submitter of Flightradar 24 and wanted to share some of my recent work regarding the use of Docker and a Raspberry Pi to allow full configuration and submitting to the Flightradar, Planefinder and Flightaware in under an hour.
Then I noted above....
"IMPORTANT NOTICE! In order to protect forum from spam robots, please don't include any links in your first 3 posts that you make on the forum, as your post will automatically be deleted."
As a first time poster to this forum, I'll have to elaborate a bit more without providing links.
Although hoping to follow up this post with some information that would help.
Before starting with my process the following is required:
1. A Raspberry Pi (preferably 2)
2. An empty micro SD card (16GB or more, class 10 preferred)
3. An RTL-SDR dongle with antenna
4. A small amount of time with almost no technical knowledge required
I have spent a lot of time on my own Pi, but wanted to create a process that would:
a) allow me to configure additional Pi's quickly and easily
b) a process that could be altered slightly for different GPS locations
Hoping to post more rather than leave everyone hanging....
In the meantime, please refer to the Hypriot OS website and I'll post shortly
Comment