Hi there
I hope someone can help me re-connect to FR24. I used to connect perfectly well with the old software, but now that I have to enter the correct IP address and port details I am struggling.
Hopefully this is enough info for someone to provide some helpful advice:
I am feeding from SBS3 via network with following NVM settings:
IP Address: 192.168.0.170
SBS3 as server: Port = 10001
NMEA Connection: SBS3 as server - Port = 30007
I am also feeding to Plane Plotter and to VRS (VRS using address 127.0.0.1 and port 30003)
Please advise if more information is required, but hopefully someone can advise correct settings for the FR24 .ini file
Thanks in advance
Mark
I hope someone can help me re-connect to FR24. I used to connect perfectly well with the old software, but now that I have to enter the correct IP address and port details I am struggling.
Hopefully this is enough info for someone to provide some helpful advice:
I am feeding from SBS3 via network with following NVM settings:
IP Address: 192.168.0.170
SBS3 as server: Port = 10001
NMEA Connection: SBS3 as server - Port = 30007
I am also feeding to Plane Plotter and to VRS (VRS using address 127.0.0.1 and port 30003)
Please advise if more information is required, but hopefully someone can advise correct settings for the FR24 .ini file
Thanks in advance
Mark
Comment