Hi all,
Any help gratefully received as I'm a bit stuck with this - I have tried googling plus reading through relevant looking threads in this forum, without success.
I am trying to feed from my SBS1 connected to my W10 PC via USB.
Basestation is working fine, as is PP but I cannot seem to figure out why I cannot get the fr24feed to work correctly - it was working fine in the previous version, which expired end of last month.
During the initial config stage, I am not sure what I should be putting when prompted for RAW data feed, Basestation datafeed and SBS/Basestation RAW data feed - I have tried various combinations of yes/no but this may or may not be connected with the authentication errors, below. I was originally thrown by the option to MLAT, to which I was answering yes, then not understanding why DVB-T was the only feeder device.....I now put no to the MLAT question.
Extract from log:-
2015-10-13 11:30:09 | [main][i]FR24 Feeder/Decoder [0x02107000]
2015-10-13 11:30:09 | [main][i]Version: 1.0.14-9/generic
2015-10-13 11:30:09 | [main][i]Built on Sep 7 2015 14:19:56 (r:284/Windows/i386)
2015-10-13 11:30:09 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
2015-10-13 11:30:09 | [main][i]Flightradar24 AB(removed)
2015-10-13 11:30:09 | [main][i]Reader 0 started
2015-10-13 11:30:09 | [time][i]Synchronizing time via NTP
2015-10-13 11:30:09 | [master][i]Starting processing thread
2015-10-13 11:30:09 | [reader][i][0]Initializing reader
2015-10-13 11:30:09 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:09 | [httpd][i]Server started, listening on 0.0.0.0:8754
2015-10-13 11:30:09 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:13 | [time][i]Time synchronized correctly, offset +0.0006 seconds
2015-10-13 11:30:13 | [main][i]Feed Network client started
2015-10-13 11:30:13 | [feed][i]Downloading configuration
2015-10-13 11:30:14 | [feed][c]Interval: 5s
2015-10-13 11:30:14 | [feed][c]Latitude: <removed>
2015-10-13 11:30:14 | [feed][c]Longitude: <removed>
2015-10-13 11:30:14 | [feed][c]GND: YES
2015-10-13 11:30:14 | [feed][c]NonADSB: YES
2015-10-13 11:30:14 | [feed][c]Timestamps: optional
2015-10-13 11:30:14 | [feed][c]Max range AIR: 350.0nm
2015-10-13 11:30:14 | [feed][c]Max range GND: 100.0nm
2015-10-13 11:30:14 | [feed][i]defined 1 server
2015-10-13 11:30:14 | [feed][n]EGBN12@83.140.21.66:8099/UDP
2015-10-13 11:30:14 | [feed][n]connecting
2015-10-13 11:30:14 | [stats][i]Stats thread started
2015-10-13 11:30:26 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:26 | MSGS-OK: 0
2015-10-13 11:30:26 | MSGS-ER: 0
2015-10-13 11:30:31 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:31 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:34 | [feed][n]connected via TCP
2015-10-13 11:30:34 | [feed][n]switching to UDP
2015-10-13 11:30:34 | [feed][n]working
2015-10-13 11:30:48 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:48 | MSGS-OK: 0
Many thanks in advance,
Paul.
Any help gratefully received as I'm a bit stuck with this - I have tried googling plus reading through relevant looking threads in this forum, without success.
I am trying to feed from my SBS1 connected to my W10 PC via USB.
Basestation is working fine, as is PP but I cannot seem to figure out why I cannot get the fr24feed to work correctly - it was working fine in the previous version, which expired end of last month.
During the initial config stage, I am not sure what I should be putting when prompted for RAW data feed, Basestation datafeed and SBS/Basestation RAW data feed - I have tried various combinations of yes/no but this may or may not be connected with the authentication errors, below. I was originally thrown by the option to MLAT, to which I was answering yes, then not understanding why DVB-T was the only feeder device.....I now put no to the MLAT question.
Extract from log:-
2015-10-13 11:30:09 | [main][i]FR24 Feeder/Decoder [0x02107000]
2015-10-13 11:30:09 | [main][i]Version: 1.0.14-9/generic
2015-10-13 11:30:09 | [main][i]Built on Sep 7 2015 14:19:56 (r:284/Windows/i386)
2015-10-13 11:30:09 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
2015-10-13 11:30:09 | [main][i]Flightradar24 AB(removed)
2015-10-13 11:30:09 | [main][i]Reader 0 started
2015-10-13 11:30:09 | [time][i]Synchronizing time via NTP
2015-10-13 11:30:09 | [master][i]Starting processing thread
2015-10-13 11:30:09 | [reader][i][0]Initializing reader
2015-10-13 11:30:09 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:09 | [httpd][i]Server started, listening on 0.0.0.0:8754
2015-10-13 11:30:09 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:13 | [time][i]Time synchronized correctly, offset +0.0006 seconds
2015-10-13 11:30:13 | [main][i]Feed Network client started
2015-10-13 11:30:13 | [feed][i]Downloading configuration
2015-10-13 11:30:14 | [feed][c]Interval: 5s
2015-10-13 11:30:14 | [feed][c]Latitude: <removed>
2015-10-13 11:30:14 | [feed][c]Longitude: <removed>
2015-10-13 11:30:14 | [feed][c]GND: YES
2015-10-13 11:30:14 | [feed][c]NonADSB: YES
2015-10-13 11:30:14 | [feed][c]Timestamps: optional
2015-10-13 11:30:14 | [feed][c]Max range AIR: 350.0nm
2015-10-13 11:30:14 | [feed][c]Max range GND: 100.0nm
2015-10-13 11:30:14 | [feed][i]defined 1 server
2015-10-13 11:30:14 | [feed][n]EGBN12@83.140.21.66:8099/UDP
2015-10-13 11:30:14 | [feed][n]connecting
2015-10-13 11:30:14 | [stats][i]Stats thread started
2015-10-13 11:30:26 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:26 | MSGS-OK: 0
2015-10-13 11:30:26 | MSGS-ER: 0
2015-10-13 11:30:31 | [reader][i][0]Connecting to SBS1 receiver via USB (DEFAULT)
2015-10-13 11:30:31 | [reader][i][0]Connected to the receiver, authenticating
2015-10-13 11:30:34 | [feed][n]connected via TCP
2015-10-13 11:30:34 | [feed][n]switching to UDP
2015-10-13 11:30:34 | [feed][n]working
2015-10-13 11:30:48 | [reader][e][0]Authentication failed, please make sure the specified device is a SBSX-USB receiver
2015-10-13 11:30:48 | MSGS-OK: 0
Many thanks in advance,
Paul.
Comment