Page 43 of 91 FirstFirst ... 33414243444553 ... LastLast
Results 421 to 430 of 901

Thread: Archived - Beta test MLAT software for Raspberry Pi

  1. #421
    Flight attendant malavanehsan's Avatar
    Join Date
    Mar 2013
    Posts
    69
    What's Meanning Of T_MLAT7?

  2. #422
    Passenger
    Join Date
    Oct 2014
    Posts
    42
    RPI MLAT aided positions. This also work for MLAT6

  3. #423
    Passenger
    Join Date
    Mar 2014
    Posts
    7
    I'm trying to run the new fr24feed software with the following configuration: feeding server is pulling SBS1 data over TCP from port 30003 on a remote device that is running antirez's original dump1090 (i.e. https://github.com/antirez/dump1090#port-30003)

    Up until now I was running the legacy client using fr24feed_x64_241 --fr24key=abcd --bs-ip=example.com --bs-port=30003 (where example.com is the IP of the device running dump1090)

    What is the equivalent of this on the new client? I can't seem to find any configuration that works, and the lack of docs isn't helping :/

  4. #424
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    4,957
    If the hosting device is running dump1090, the client (Im assuming you are talking running on a separate windows PC here? - why not run it on the Pi too?) needs to use the raw out (avrtcp) of dump1090 from port 30002
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  5. #425
    Passenger
    Join Date
    Mar 2014
    Posts
    7
    Ah! Success with the following command line:

    fr24feed --fr24key=abcd --host=example.com:30002 --receiver=avr-tcp

    Just as some background on my setup, I'm running dump1090 on a very lightweight OpenWRT device (https://blog.y3xz.com/blog/2014/04/2...dar24-dot-com/) so there's currently no way for me to run the FR24 client on the same device, I have to run it off another host and pull the data over TCP.

    Thanks for the help!

  6. #426
    Passenger
    Join Date
    Nov 2015
    Posts
    8
    Hi all!

    I've installed the fr24feeder on my Paspbery Pi 2 B.
    Configuration etc is done

    I see no errors but with "sudo service fr24feed status" I get the follwoing output:
    pi@rpphg ~ $ sudo service fr24feed status
    ● fr24feed.service - LSB: Flightradar24 Decoder & Feeder
    Loaded: loaded (/etc/init.d/fr24feed)
    Active: active (running) since So 2015-11-15 21:53:15 CET; 7s ago
    Process: 2688 ExecStop=/etc/init.d/fr24feed stop (code=exited, status=0/SUCCESS)
    Process: 2780 ExecStart=/etc/init.d/fr24feed start (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/fr24feed.service
    ├─2796 /usr/bin/fr24feed -- --monitor-file=/dev/shm/fr24feed.txt --write-...
    └─2816 /usr/lib/fr24/dump1090 --raw

    Nov 15 21:53:15 rpphg fr24feed[2780]: Starting FR24 feeder: fr24feed.
    Nov 15 21:53:15 rpphg systemd[1]: Started LSB: Flightradar24 Decoder & Feeder.
    It seem's that there's something wrong or missing.
    Any ideas?

    thanks!

    phg

  7. #427
    Passenger
    Join Date
    Nov 2015
    Posts
    1
    Is there a non Debian *.tgz available anywhere? On the feed page I can only find a link to the old 1.0.13 version.

  8. #428
    Flight attendant
    Join Date
    Jun 2015
    Posts
    62
    We do plan to publish tgz with the next release.

  9. #429
    Passenger
    Join Date
    Nov 2015
    Posts
    8
    Hi all!

    The feed overview in my account shows an update: #232
    How can I update my PI?

    thanks

    phg

  10. #430
    First officer
    Join Date
    Mar 2013
    Location
    Arhus (T-EKAH3), Denmark
    Posts
    345
    Quote Originally Posted by phg View Post
    Hi all!

    The feed overview in my account shows an update: #232
    How can I update my PI?

    thanks

    phg
    sudo bash -c "$(wget -O - http://repo.feed.flightradar24.com/install_fr24_rpi.sh)"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •