Results 1 to 5 of 5

Thread: FR24 on RPi with piaware and dump1090 already running

  1. #1
    Passenger
    Join Date
    Nov 2014
    Posts
    20

    FR24 on RPi with piaware and dump1090 already running

    Hey guys, I would like to feed flightradar24 with my already setup flightaware feeds. I tried the installation but when I run the feed I get this:


    root@flightaware:/home/odroid/fr24feed_rpi# ./fr24feed
    2015-04-09 09:08:03 | [main][i]FR24 Feeder/Decoder [0x02117000]
    2015-04-09 09:08:03 | [main][i]Version: 1.0.12-3/generic
    2015-04-09 09:08:03 | [main][i]Built on 20150209-1316 (r:master-0a6ad34.git/Linux/armv6l)
    2015-04-09 09:08:03 | [main][i]Copyright 2008-2015 (c) Piotr Pawluczuk
    2015-04-09 09:08:03 | [main][i]Flightradar24 AB(http://flightradar24.com)
    2015-04-09 09:08:03 | [main][i]DNS mode: LIBC
    2015-04-09 09:08:03 | ERROR
    2015-04-09 09:08:03 | [main][i]Reader 0 started
    2015-04-09 09:08:03 | [time][i]Synchronizing time via NTP
    2015-04-09 09:08:03 | [httpd][i]Server started, listening on 0.0.0.0:8754
    2015-04-09 09:08:03 | [master][i]Starting processing thread
    2015-04-09 09:08:03 | [reader][i][0]Initializing reader
    2015-04-09 09:08:03 | [reader][i][0]Connecting to Generic receiver via (exe:///usr/lib/fr24/mr-dump1090 --net --net-http-port 8080 --raw)
    2015-04-09 09:08:03 | [reader][i][0]Connected to the receiver, authenticating
    2015-04-09 09:08:03 | [reader][i][0]Authenticated, processing messages
    Found 3 device(s):
    0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
    1: Generic, RTL2832U, SN: 77771111153705700
    2: Generic, RTL2832U, SN: 77771111153705700
    usb_claim_interface error -6
    Error opening the RTLSDR device: Device or resource busy
    2015-04-09 09:08:03 | [reader][i][0]Connection terminated
    2015-04-09 09:08:03 | [main][i]Terminating child process 5821 with SIGETERM
    2015-04-09 09:08:09 | [reader][i][0]Connecting to Generic receiver via (exe:///usr/lib/fr24/mr-dump1090 --net --net-http-port 8080 --raw)
    2015-04-09 09:08:09 | [reader][i][0]Connected to the receiver, authenticating
    2015-04-09 09:08:09 | [reader][i][0]Authenticated, processing messages
    Found 3 device(s):
    0: Realtek, RTL2838UHIDIR, SN: 00000001 (currently selected)
    1: Generic, RTL2832U, SN: 77771111153705700
    2: Generic, RTL2832U, SN: 77771111153705700
    usb_claim_interface error -6

    How do I get fr24 to just recieve from the port, not open up the already used RTL dongles?

  2. #2
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,045
    Edit the config file (or use the web on <rpi IP>:8754 to configure it.

    You should have specified AVR Via TCP and specified the output port of the other app talking to the sticks

  3. #3
    Passenger
    Join Date
    Apr 2015
    Posts
    1
    If dump1090 is already running, just use the program from this thread and you'll have it running within seconds!

    http://forum.flightradar24.com/threa...-Flightradar24

  4. #4
    First officer
    Join Date
    Sep 2013
    Location
    Farnborough, UK
    Posts
    204
    as oblivian said the application you using by default does the what dump1090 does for the flightaware software, you need to tell it not to and connect to a network socket (your existing dump1090) instead.
    T-EGLF8

  5. #5
    Passenger
    Join Date
    Nov 2014
    Posts
    20
    Thank you so much daviddoentniets !! I downloaded the one for the raspberry pi (i'm using an odroid C1) and yep, up and running. It did take me about 5 minutes though

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •