Page 5 of 5 FirstFirst ... 345
Results 41 to 44 of 44

Thread: DUMP1090 on Windows: no map display in browser

  1. #41
    Passenger
    Join Date
    Mar 2016
    Posts
    25
    Quote Originally Posted by andrewh_85 View Post
    Thanks appreciate it
    Any Luck on this one?

  2. #42
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,852
    @andrewh_85

    I have dump1090-mutability + lighttp, both INSTALLED on RPi, but accessed from Windows Desktop (using SSH for command, and browser for map).

    Yesterday I tried setting port forwarding.

    First image is how I set port forwarding in my home network modem
    (Application: HTTP, Port Range=80 to 80, Local IP Address=Local IP of RPi, Remote IP Address=Any, Protocol=TCP)

    Second image shows I can see it on my phone on its 4G data network, away from home network
    http://xxx.xxx.xxx.xxx/dump1090/gmap.html where xxx.xxx.xxx.xxx = my Internet IP address
    (on my Desktop on the same local network as the RPi, I can see the map at http://<Local IP address of RPI>/dump1090/gmap.html )

    Third image shows my FR24 settings page at http://<ip address of RPi>:8754/settings.html
    Receiver=AVR(TCP), HOST/IP=localhost:30002 (or 127.0.0.1:30002), COM/DEV Path= I left it blank, Process Arguments= I left it blank, RAW Data=NO, SBS Feed=NO, Decoded Data=NO, MLAT=YES

    portforwarding settings.png . port forwarding gmap.jpg . FR24 settings page at port 8754.jpg
    Last edited by abcd567; 2016-08-02 at 19:21.

  3. #43
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,852
    @ Oblivian
    @andrewh_85
    This thread is for Dump1090 INSTALLED on Windows (dump1090.exe) while we started discussing Dump1090 INSTALLED on Raspberry Pi.

    Initially it was my mistake that I did not realize that the dump1090 installation is on windows.

    I think our posts should not be here, but moved to some other relevant thread.
    Last edited by abcd567; 2016-08-02 at 19:22.

  4. #44
    Passenger
    Join Date
    Mar 2016
    Posts
    25
    Quote Originally Posted by abcd567 View Post
    @ Oblivian
    @andrewh_85
    This thread is for Dump1090 INSTALLED on Windows (dump1090.exe) while we started discussing Dump1090 INSTALLED on Raspberry Pi.

    Initially it was my mistake that I did not realize that the dump1090 installation is on windows.

    I think our posts should not be here, but moved to some other relevant thread.
    abcd567 thanks for your help on this finally figured it out, my TP-Link router uses port 80 for remote management so I changed the port for the router and it now works.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •