Is that Dump crash solved when useing more than one parameter ?
Announcement
Collapse
No announcement yet.
Flightradar24 decoder/feeder BETA testing (Win/RPi/Linux/OSX)
Collapse
This topic is closed.
X
X
-
Yes sure, thats my ini
Code:receiver="dvbt" fr24key= path="/usr/lib/fr24/mr-dump1090" bs="no" raw="no" logmode="2" procargs="--net" windowmode="0"
Regards,
T-EDDE7
Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
Banana Pi | Mystique SDR R820T2 | stock Antenna
Comment
-
Ahh
The parameters are "--net --net-http-port 8082 --agressive --enable-agc --net-beast"
At the moment I only run "--net" and it is working fine. If I add a 2nd or 3rd (and so on) parameter, dump will crashRegards,
T-EDDE7
Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
Banana Pi | Mystique SDR R820T2 | stock Antenna
Comment
-
When checking the status of fr24feed, I've been getting regular errors with the link to FR24 quite a bit this afternoon:
[FAIL] FR24 Link: connection ... failed!
The reader is otherwise working fine, as I'm able to view data from dump1090, and the pi has a good Internet connection as I have tested downloading files. It occasionally works, so I know there is no issue with my key. This is using both the previous Pi version and the new test build released earlier today.F-KJAN3 and T-KJAN2...providing ground traffic at JAN and low level coverage around the Jackson, MS metro area
Comment
-
The stats on port 8754 are cool though! :-)
Comment
-
I just received a replacement DVBT dongle (replacing my ancient nano one which decided to try itself). Noticed the existing feeder was exiting with an error.
Found this thread and, it's up and running. Fairly smoothly on rPI with an aerial on the balcony rail. If anything, this hardware seems to work better than the older (more expensive) one...
Comment
-
Issue solved for me, thanks to Piotr who gave me the final Idea to remove the "--agressive" in my parameters. Will check the new Build soonRegards,
T-EDDE7
Debian 8 Server | jetvision ADS-B USB Dongle | ADS-B Collinear Antenna
Banana Pi | Mystique SDR R820T2 | stock Antenna
Comment
-
Seems to be bit of an issue with Beast Config on the new windows build.
At first it crashed with the default .ini file. So I removed all but share key and re-launched to configure.
However before configuring port I got what I expected...
[reader][i][0]Connecting to Generic receiver via (/dev/ttyUSB0@3000000)
[reader][e][0]Could not connect to /dev/ttyUSB0@3000000
Adjusted the Com port correctly, and it started crashing.
I've narrowed it down to the BS server running, if it is disabled it will run fine. As soon as New client connected message is seen the app crashes.Posts not to be taken as official support representation - Just a helpful uploader who tinkers
Comment
Comment