+1
Got here a Pi ready for that, too. :-)
Got here a Pi ready for that, too. :-)
sudo apt-get install git-core sudo apt-get install git sudo apt-get install cmake sudo apt-get install libusb-1.0-0-dev sudo apt-get install build-essential git clone git://git.osmocom.org/rtl-sdr.git cd rtl-sdr mkdir build cd build cmake ../ -DINSTALL_UDEV_RULES=ON make sudo make install sudo ldconfig cd ~ sudo cp ./rtl-sdr/rtl-sdr.rules /etc/udev/rules.d/ sudo reboot cd ~ git clone git://github.com/MalcolmRobb/dump1090.git cd dump1090 make ./dump1090 --interactive --net --net-http-port 8080
When booted to console or desktop: Sudo apt-get update Sudo apt-get upgrade Sudo reboot When Rebooted: wget http://feed.flightradar24.com/raspberry-pi/fr24feed_1.0.12-3_armhf.deb sudo dpkg -i fr24feed_1.0.12-3_armhf.deb sudo fr24feed --reconfigure --fr24key=0123456789ABCDEF sudo service fr24feed start sudo reboot When rebooted check that everthing is running with: service fr24feed status
Kinetics SBS1, SBS1er, SBS3 - USB and Network Mode-S Beast - USB and Network [B]Most DVBT sticks - USB and Network[/B] Most “AVR” compatible receivers - USB/Serial and Network
Kinetics SBS1, SBS1er, SBS3 - USB and Network Mode-S Beast - USB and Network [B]Most DVBT sticks - USB and Network[/B] Most “AVR” compatible receivers - USB/Serial and Network
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment