Announcement

Collapse
No announcement yet.

too few aircraft, at least 2 required?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • too few aircraft, at least 2 required?

    Hello, On the flightradar24 feeder it always says - too few aircraft, at least 2 required?

    I am using an RTL2832U / R820T with a 16 element 1090mhz collinear antenna

    I start the RTL1090 Beta2 software, within a minute its showing 6 to 8 aircraft, within 10 minutes its showing 28 aircraft
    but the feeder always says - too few aircraft, at least 2 required

    RTL1090 is set to Mode S, I also tried Mode AC but it doesn't work either.

    GND: YES
    Mode-S: NO
    Protocol:TCP
    Basestation: OK
    Info: - too few aircraft, at least 2 required
    Network:OFF
    TX/AC Loss 0.0%/0.0%

    what am I doing wrong?
    also I noticed the text on RTL1090 is off the screen? how can I increase the size of the window?

    thanks

  • #2
    try rtl1090 that is NOT beta
    For official support use Contact Form

    Comment


    • #3
      I found the problem, rtl1090 was running on port 31001 and it should have been on port 30003

      Comment

      Working...
      X