There are new versions of ModeSMixer2 v.20140616 and ModeSDeco2 v.20140616 for all platforms in #6 and #7 messages of this thread.
+ changed the algorithm of determining of PI (Parity/interrogator identifier) - downlink field that have parity overlaid on the interrogator’s identity code and shall appear in the Mode-S all-call reply, DF = 11 and in the extended squitter, DF = 17 or DF = 18.
ModeSDeco2 may be used for beamfinder with PlanePlotter
modesdeco2_planeplotter_beamfinder_1.jpg modesdeco2_planeplotter_beamfinder_2.jpg
+ changed the algorithm of processing of Interrogator Codes II (Interrogator Identifier) and SI (Surveillance Identifier) for data transcoding in RAW SBS format (--sbs10001)
For ModeSMixer2, due to incomplete support by PlanePlotter bidirectional data communication for starting procedure of SBS10001 connection, should be used sbs30006 output mode: "... --outServer sbs30006:30006 ..."
modesmixer2 --inConnect IP:Port --outServer sbs30006:30006 --outServer sbs10001:10001 --outServer msg:30003
I would be very grateful for your testing and feedback.
Thanks,
sergsero
+ changed the algorithm of determining of PI (Parity/interrogator identifier) - downlink field that have parity overlaid on the interrogator’s identity code and shall appear in the Mode-S all-call reply, DF = 11 and in the extended squitter, DF = 17 or DF = 18.
ModeSDeco2 may be used for beamfinder with PlanePlotter
modesdeco2_planeplotter_beamfinder_1.jpg modesdeco2_planeplotter_beamfinder_2.jpg
+ changed the algorithm of processing of Interrogator Codes II (Interrogator Identifier) and SI (Surveillance Identifier) for data transcoding in RAW SBS format (--sbs10001)
For ModeSMixer2, due to incomplete support by PlanePlotter bidirectional data communication for starting procedure of SBS10001 connection, should be used sbs30006 output mode: "... --outServer sbs30006:30006 ..."
modesmixer2 --inConnect IP:Port --outServer sbs30006:30006 --outServer sbs10001:10001 --outServer msg:30003
I would be very grateful for your testing and feedback.
Thanks,
sergsero
Comment