Announcement
Collapse
No announcement yet.
Request to Support, Please inform uploaders before changing the config
Collapse
X
-
Originally posted by Jarod View PostEdit2:
You can still press RECEIVER SOFTWARE: ON [stop, display log], the stop button. I would suggest this is removed from the code.
I check the log to see if data is send to the servers.
When stop is pressed, clicking on start does not work. A server reboot fixes the problem, but that is due to the updated software from yesterday i am sure.
One problem remained -- BS FEED [30003]: DOWN
Comment
-
Originally posted by ukcc View PostClicking on start work, just checked.
One problem remained -- BS FEED [30003]: DOWN
Use 30334. http://forum.flightradar24.com/threa...ll=1#post45620
I never used 30003 anywayFor official support use Contact Form
Comment
-
My GPS led is blinking red/green now continuously. Status shows the GPS data now. And the log reports MLAT data is finally uploaded.
Edit: Never mind the previous question. It appears there is being worked on my radar. (Or all radars for that matter).
If it was only mine, an email requesting i do not touch it would be advised. Now i am trying everything to get MLAT working...Last edited by Jarod; 2014-02-25, 11:25.
Comment
-
please see http://forum.flightradar24.com/threa...ll=1#post45602
from MikeC, Support: We have temporarily disabled the secondary feeds while we diagnose the issue. MikeC
Comment
-
GPS is blinking all green again. I had to put the antenna outside to get a proper fix. Now the antenna is moved back to the window sill and all appears okay.
Also the FR24 has registered once with the MLAT server (instead of keep doing that) and it keeps feeding MLAT data.
This begs the question, how many other receivers need a reset and have MLAT checked. I highly recommend your server checks also include if MLAT is working properly.
Comment
-
I noticed interesting thing, the receiver GPS freeze when the first picture error came out.
error.PNG
Nogps.PNG
and when its happen receiver wont send anything data, rebooting receiver starts GPS and everything OK but my receiver has been done this same error three times this evening, and always same error.
restarted.PNG
Restarted, and GPS is OK and receiver send data out.Last edited by aabelix; 2014-02-25, 20:13.
Comment
-
Originally posted by aabelix View PostI noticed interesting thing, the receiver GPS freeze when the first picture error came out.
[ATTACH=CONFIG]3404[/ATTACH]
[ATTACH=CONFIG]3405[/ATTACH]
and when its happen receiver wont send anything data, rebooting receiver starts GPS and everything OK but my receiver has been done this same error three times this evening, and always same error.
[ATTACH=CONFIG]3406[/ATTACH]
Restarted, and GPS is OK and receiver send data out.
I have never had/seen that error. If i were you i'd contact support@fr24.com and include these pictures.
Comment
-
Five times now, if there is airplanes at sky and receiver get data receiver works, but when there are no available data GPS freeze, my FR24 GPS antenna is on the roof, and the same place are two lightningradar GPS antennas and both of them get 100% position signal.
Comment
-
As previously posted, FR24 receiver hosts should be contacting Support@FR24.com for all related support.
It's virtually impossible to match a forum user name to our receiver ID.
Comment
-
Yes I have to reboot the Box every morning now to get it working properly__________________________________________________ _
You learn something new every day in your life
http://www.multi.fi/~jaboman
Comment
-
Originally posted by piopawlu View PostThe FPGA reprogramming has been disabled until it's working properly and all your stations has been updated. The port 30003 is also back.
Nice, and i can confirm MLAT (GPS) instantly locked again. And all MLAT aircraft are still perfectly shown on the map.
A fun one:
http://x264.nl/dump/zxp3-2014-02-26-mlat.jpg (police heli)
A rare one:
http://x264.nl/dump/cmb538-2014-02-26-mlat.jpg (....due to the confusion in some states regarding both civil and military aircraft operating for the US Dept of Defense under Reach (RCH) callsigns, it has been agreed that from 1-Jul-10, civil aircraft operating for the US DoD will use Camber (CMB).)
Comment
Comment