Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: rtl1090 crashing

  1. #21
    Passenger
    Join Date
    Oct 2013
    Location
    Sundsvall, Sweden
    Posts
    20
    Quote Originally Posted by Oblivian View Post
    http://www.howtogeek.com/howto/windo...-new-hardware/

    Follow above guide to ensure all remnants of the driver located on machine are removed. Drivers don't truely uninstall. They simply remove the reference of it until next time you plug it in.
    I found that guide before and tried it aswell. It doesn't change anything. Once I reboot, Windows chooses the same drivers and I'm back at square one again..

  2. #22
    Captain
    Join Date
    Jan 2012
    Location
    Dudley area, UK
    Posts
    1,410
    Don't forget recent windows systems have a system restore facility ... you may be able to set the operating system state back to just before the erroneous installation of the drivers.

  3. #23
    Passenger
    Join Date
    Oct 2013
    Location
    Sundsvall, Sweden
    Posts
    20
    Quote Originally Posted by peterhr View Post
    Don't forget recent windows systems have a system restore facility ... you may be able to set the operating system state back to just before the erroneous installation of the drivers.
    Unfortunately there isn't any restore point before installation of the drivers for the first time. Otherwise this might have been a solution.
    Last edited by limparius; 2013-10-09 at 13:43.

  4. #24
    Passenger
    Join Date
    Sep 2013
    Posts
    7
    Windows 7

    To prevent automatic driver installations...

    Start Menu search box : type change device installation settings

    Launch the change device installation program.

    Change the settings to suite your need.

  5. #25
    Passenger
    Join Date
    Oct 2013
    Location
    Sundsvall, Sweden
    Posts
    20
    Quote Originally Posted by DRL View Post
    Windows 7

    To prevent automatic driver installations...

    Start Menu search box : type change device installation settings

    Launch the change device installation program.

    Change the settings to suite your need.
    Unfortunately, that won't do it. If Windows already has drivers it think will work, it'll install them anyway.

  6. #26
    Passenger
    Join Date
    Sep 2013
    Posts
    7

  7. #27
    First officer paradiselost's Avatar
    Join Date
    Sep 2012
    Location
    Dumaguete Negros Oriental PH
    Posts
    356

    Dongle Not Recognized Fixes

    Quote Originally Posted by limparius View Post
    Unfortunately, that won't do it. If Windows already has drivers it think will work, it'll install them anyway.
    98% of dongle not recognized are due to the wrong sequence of Zadig selection. To work around the improper driver installation is to use a different USB port. The Bulk_Interface allows the detection of the dongle and the dongle driver allows communication and manipulation of the dongle. Stuff happens and you need to know what to do to recover.

    Start the computer without the dongle then plug it in and cancel any operating system driver installation.

    Run Zadig as specified.

    Start the RTL1090 program and if you don't have it set in the Config to start automatically you will need to click on the start button. To see plane ICAO numbers and call sign you will have to select the Mode-S instead of the Mode-AC and List has to be off so you can see the TABLE view. If you are not sing the latest Beta version of the RTL1090 program get it. The graphical interface is better and you can see what is off and what is enabled.

    These two attachments show the proper sequence of events using Zadig.


    John

    T-RPVD1

    http://fr24.com/9.08,124.75/7

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •