Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: New Installation Problems

  1. #1
    Passenger
    Join Date
    Jul 2013
    Location
    Keighley, West Yorkshire
    Posts
    16

    New Installation Problems

    Hi All

    My Name's Rick i'm new to all this I've been watching Flight Radar for sometime now and thought I would give something back so I decided to give it a go by buying a DVB stick installed everything fine as it says on the how it works page

    for some reason all I see in the jetvision rtl software is a lot of keys and not how it looks in the screenshot ,have I not installed something correctly? or is it just cause I have bad reception where I am, I've tried uploading data via FR Feed and it just says you need 2 or more aircraft to receive your sharing key.
    I've tried everything and now i'm stuck
    I've attached screen shots of what my feeds look like

    hope you can help guys

    many thanks
    Rick
    Screenshot flight.jpg
    Last edited by Rick2522; 2013-07-01 at 16:51.

  2. #2
    First officer
    Join Date
    Dec 2012
    Posts
    231
    Quote Originally Posted by Rick2522 View Post
    for some reason all I see in the jetvision rtl software is a lot of keys and not how it looks in the screenshot
    On your jetvision screen, can you see a label marked 'LIST' ? (it's on the same line as the START/STOP button) - see my attachment
    Click on that and see what happens.

    pp and rtl1090.jpg

    The Sage
    Last edited by The Sage of Milton; 2013-07-01 at 17:47.

  3. #3
    Passenger
    Join Date
    Jul 2013
    Location
    Keighley, West Yorkshire
    Posts
    16
    Brilliant something so simple haha, many thanks for your help I can now see the aircraft, but i'm still having problems now with fr feed not seeing anything i'll keep it open and see what happens maybe coverage by me isn't the best even though i'm 20 mins from Leeds / Bradford Airport

  4. #4
    Have you set the port 30003 parameter in the RTL1090.exe shortcut:

    http://www.flightradar24.com/dvbt-stick

  5. #5
    Passenger
    Join Date
    Jul 2013
    Location
    Keighley, West Yorkshire
    Posts
    16
    I've just done it now and received my Sharing Key Brilliant many thanks for all your help everyone, happy sharing

  6. #6
    Passenger
    Join Date
    Jul 2013
    Location
    Keighley, West Yorkshire
    Posts
    16

    Flight Radar Feed Verify

    Just a quick question I've managed to get plane plotter up and running now but how do I know if i'm transmitting data to Flight radar as I can now see planes landing at lbia via plane plotter but not on flight radar I've attached of a screenshot of my feeder can someone verify that i'm sending info ok

    screen 2.jpg

  7. #7
    We are definitely receiving your data.

    Are the aircraft on PP not appearing at all on Flightradar24?

    Check your PP settings as you may have "Predict positions" set. Options->Chart->Options.

  8. #8
    Passenger
    Join Date
    Jul 2013
    Location
    Keighley, West Yorkshire
    Posts
    16
    Yeah I had that option set it seems that plane plotter can see aircraft that flight radar cant like when there taking off form LBIA I can see them taking off on PP but not on Flight Radar I've checked that setting and it was ticked so i'll see how it goes now I've unmarked it many thanks for your help again, i'm getting the hang of it

  9. #9
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,049
    If you don't have constant/good signal of ground data it will not capture and upload what is required. PP will show it and drawl lines between, but the signal may well be dropping in/out and not constant for 2-3seconds like required

  10. #10
    Passenger
    Join Date
    Jul 2013
    Location
    Keighley, West Yorkshire
    Posts
    16
    Ah I see maybe that's the case then apart from that issue everything is working fine I've had a good plane around with PP today many thanks everyone for all your assistance

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •