Results 1 to 9 of 9

Thread: Install on existing Debian 9 x64 machine?

  1. #1
    Passenger
    Join Date
    Oct 2019
    Posts
    23

    Install on existing Debian 9 x64 machine?

    Hello,

    I bought a DVB-T stick (RTL2832U + R820T2) and want to feed data on an existing Debian 9 x64 server.
    I did fine only instruction manuals for Rasperry Pi.

    Could you please tell me, how to install on an existig Debian Linux machine?
    Is it possible by "apt-get install ..."? Or is there a good manual for that anywhere?

  2. #2
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,032
    https://www.flightradar24.com/share-your-data

    Under linux tab

    But it is a very old version now. We are up to 1.0.24-4
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  3. #3
    Passenger
    Join Date
    Oct 2019
    Posts
    23
    Thank you, but on that website there is only an installer for x86 linux. I have x64 linux and need an installer for that.
    Do you know where to get?
    If I run that x86 installer, I get of course that errors:

    Code:
    root@Server:~# dpkg -i fr24feed_1.0.18-5_i386.deb
    dpkg: error processing archive fr24feed_1.0.18-5_i386.deb (--install):
     package architecture (i386) does not match system (amd64)
    Errors were encountered while processing:
     fr24feed_1.0.18-5_i386.deb

  4. #4
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,032
    I may be wrong here, But "Linux archive amd64/x86_64" = 64 bit.

    Which is what is used in the other guide you have since located.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  5. #5
    Passenger
    Join Date
    Oct 2019
    Posts
    23
    But the Linux archive is no installer. I don't know how to install and configure that correctly.

  6. #6
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,032
    You follow the step by steps in the other thread.

    1 is for compiling it as a 64bit make module

    The other is debian specific. Changes architecture and converts/installs as .deb files.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  7. #7
    Passenger
    Join Date
    Oct 2019
    Posts
    23
    Step-By-Step of other thread is not working, like I posted there.

  8. #8
    Passenger
    Join Date
    Oct 2019
    Posts
    23
    I did all steps, sorry that "sudo dpkg --add-architecture i386" was just not included in my copied code, but I did it of course.
    I will update my answer, please publish it, so that I can do it.

  9. #9
    Passenger
    Join Date
    Oct 2019
    Posts
    23
    You modified your answer now. So what exactly do you think?
    After which guide/which commands should I install? Could you please clarify?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •