Page 3 of 71 FirstFirst 123451353 ... LastLast
Results 21 to 30 of 707

Thread: Linux feeder software for Flightradar24 (Old software)

  1. #21
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by Mike View Post
    Linux feeder software for ARM without decoder: https://dl.dropbox.com/u/66906/fr24feed_arm-le_222.tgz
    "fr24feed_arm-le_222 --fr24key=SHARING_KEY" to start
    Hello Mike,

    looks very good for the start.

    It can be started on my debian ARM sheevaplug and also my Raspberry PI:

    $ ./fr24feed_arm-le_222 --fr24key=YOUR_SHARING_KEY
    [i]Downloading configuration...OK
    [i]Parsing configuration...ERROR
    [failure]: Not found, check your key!
    {"result":"failure","info":"Not found, check your key!"}

    Please provide me with a SHARED-KEY.

    My airport is EDDK (cologne airport CGN).

    Thanks

    Willi

  2. #22
    Administrator Mike's Avatar
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    3,040
    Quote Originally Posted by whz View Post
    Hello Mike,

    looks very good for the start.

    It can be started on my debian ARM sheevaplug and also my Raspberry PI:

    $ ./fr24feed_arm-le_222 --fr24key=YOUR_SHARING_KEY
    [i]Downloading configuration...OK
    [i]Parsing configuration...ERROR
    [failure]: Not found, check your key!
    {"result":"failure","info":"Not found, check your key!"}

    Please provide me with a SHARED-KEY.

    My airport is EDDK (cologne airport CGN).

    Thanks

    Willi
    Great!

    Please send an email to info@flight24.com so we get you correctly registered in the system.

  3. #23
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by Mike View Post
    Great!

    Please send an email to info@flight24.com so we get you correctly registered in the system.
    Already done.

  4. #24
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by Walt View Post
    Willi,

    Adsbox decoding is fully compatible with FR24. I use adsbox nearly a year. You can write to the author and receive the latest version (I use version from July 28).
    Hallo Walt,

    the author (Roman) told me that the latest version is http://diseqc.org.ua/projects/hard/a...0120427.tar.gz (27.4.2012).
    Do you have a newer version or is your version of 2011?

    With adsbox I do not get any airplanes at all with microADSB (this worked on windows).

    Which serial driver are you using=

    cdc_acm does not look correct: "This device cannot do calls on its own. It is not a modem."

    [1816305.887752] usb 1-1.2: USB disconnect, address 4
    [1816308.431911] usb 1-1.2: new full speed USB device using orion-ehci and address 5
    [1816308.544874] usb 1-1.2: New USB device found, idVendor=04d8, idProduct=000a
    [1816308.551977] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [1816308.559498] usb 1-1.2: Product: ADSB-PIC V.10 (sprut 2012)
    [1816308.565221] usb 1-1.2: Manufacturer: sprut (www.sprut.de)
    [1816308.573286] usb 1-1.2: configuration #1 chosen from 1 choice
    [1816308.583029] cdc_acm 1-1.2:1.0: This device cannot do calls on its own. It is not a modem.
    [1816308.592830] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device

    How do you use micoADSB on linux?
    Is there any trick to init microADSB or use a special driver?

    Regards

    Willi

  5. #25
    Passenger
    Join Date
    Jun 2012
    Posts
    28
    Hello Willi,

    The output is OK. Check that all DIPs of microADSB shall be switched OFF (for Linux).
    Is your command like this?

    adsbox -s /dev/ttyACM0 -l <your lat> -g <your lon> -r <path to the log file (optional)> -d

    I use newer version than is in a site. This version corrects a small trouble with decoding a data of transponders of old USSR-made planes and it same as version from 27.04.2012. If the author lets to me, I can send it to you.

    BR,
    Walt
    Last edited by Walt; 2012-09-22 at 06:49.

  6. #26
    Passenger
    Join Date
    Jun 2012
    Posts
    28
    Hello Mike,

    Can you compile an ARM version with statically linked libraries (with key -static)?

    Thanks.
    BR,
    Walt

  7. #27
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by Walt View Post
    Hello Willi,

    The output is OK. Check that all DIPs of microADSB shall be switched OFF (for Linux).
    Is your command like this?

    adsbox -s /dev/ttyACM0 -l <your lat> -g <your lon> -r <path to the log file (optional)> -d
    Walt
    Hello Walt,

    the V3 version of microADSB does not have any DIP switches. Instead changes are done on a special version of adsbscope on windows.
    What are the meanings of these switches?

    Could you do me tha favour and tell me what "dmesg" says for your microADSB? Mine shows:
    1816308.431911] usb 1-1.2: new full speed USB device using orion-ehci and address 5
    [1816308.544874] usb 1-1.2: New USB device found, idVendor=04d8, idProduct=000a
    [1816308.551977] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [1816308.559498] usb 1-1.2: Product: ADSB-PIC V.10 (sprut 2012)
    [1816308.565221] usb 1-1.2: Manufacturer: sprut (www.sprut.de)
    [1816308.573286] usb 1-1.2: configuration #1 chosen from 1 choice
    [1816308.583029] cdc_acm 1-1.2:1.0: This device cannot do calls on its own. It is not a modem.
    [1816308.592830] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device

    Thanks a lot!

    Best regards

    Willi

  8. #28
    Passenger
    Join Date
    Jun 2012
    Posts
    28
    Hello Willi,

    This is my output:

    usb 1-1: new full speed USB device using at91_ohci and address 2
    cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.
    cdc_acm 1-1:1.0: ttyACM0: USB ACM device


    BR,
    Walt
    Last edited by Walt; 2012-09-23 at 04:58.

  9. #29
    Passenger
    Join Date
    Apr 2012
    Posts
    2
    To initialize microADSB v3 in Linux execute folowing befor starting adsbox:
    echo '#43-02' > /dev/ttyACM0

    Best regards
    Petr K.

  10. #30
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by traincz View Post
    To initialize microADSB v3 in Linux execute folowing befor starting adsbox:
    echo '#43-02' > /dev/ttyACM0

    Best regards
    Petr K.
    Thanks a lot. I should have read your message some hours ago.

    In the meantime I had looked into the manual and seen found out that I can send commands to the receiver, like the one mentioned.
    There is also "#00" to get the receivers firmware version and others.

    Now adsbox works!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •