Page 2 of 71 FirstFirst 12341252 ... LastLast
Results 11 to 20 of 707

Thread: Linux feeder software for Flightradar24 (Old software)

  1. #11
    Passenger
    Join Date
    Jun 2012
    Posts
    28
    Hello Willi,

    I use an adsbox software http://diseqc.org.ua/projects/hard/a...0120427.tar.gz (site in Russian but is available readme in English in tar). The software decodes data and has an internal HTTP-server and allows to visualize data in Google Earth. The source and kernel 2.6.33 were compiled by ARM9 cross-tool from buildroot (http://buildroot.uclibc.org). I use the same controller as is shown in the site and have a microADSB too.

    BR,
    Walt

  2. #12
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by Walt View Post
    Thanks for confirmation about adsbox! Before I bought my micoADSB I have seen this software already.

    I got my microADSB yesterday and have tested it on Windows using ADSBScope. Worked very well. I have seen more planes in my area than shown on FR24 (airport CGN = EDDK, I am living near the airport). But it maybe that the other feeders have just turned off their Windows machines. This is not going to happen on linux ;-)

    I have planned to compile adsbox at this weekend on my Raspberry PI or sheevaplug (native compile, no crosscompiling).

    Do you also have experience that the decoding of adsbox is fully compatible with feeding FR24? In the source I have seen that it generates these types of messages (like "MSG,...").

    Regards Willi
    Last edited by whz; 2012-09-21 at 08:44.

  3. #13
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by whz View Post
    Hello Mike,

    I have a microADSB. Decoder would be nice.

    Regards

    Willi
    Hello Mike,

    as Walt indends to use adsbox for decoding it is sufficient for me to get a feeder software without decoding also!
    This also allows me to archive my local data using adsbox.

    I have seen the following documentation of the SBS decoding format: http://www.homepages.mcb.net/bones/S...ocket_Data.htm
    Is this the format that your feeder software expects on port 30003?

    Regards

    Willi
    Last edited by whz; 2012-09-21 at 08:53.

  4. #14
    Administrator Mike's Avatar
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    2,982
    Quote Originally Posted by whz View Post
    I have seen the following documentation of the SBS decoding format: http://www.homepages.mcb.net/bones/S...ocket_Data.htm
    Is this the format that your feeder software expects on port 30003?
    Correct! I hope the uploading software for ARM will be ready today or Monday.

  5. #15
    Captain Anmer's Avatar
    Join Date
    Apr 2010
    Posts
    1,089
    Quote Originally Posted by whz View Post
    I have seen the following documentation......
    You may like to read the Kinetic API:

    http://www.kinetic-avionics.com/newsite/api.php
    Mike


    www.radarspotting.com

    Radarspotting since 2005

  6. #16
    Passenger
    Join Date
    Sep 2012
    Location
    near EDDK (Cologne airport, Germany)
    Posts
    30
    Quote Originally Posted by Anmer View Post
    You may like to read the Kinetic API:

    http://www.kinetic-avionics.com/newsite/api.php
    In the document KINETIC API reference I have only seen a binary format (not decoded). Thiis seems to be a different format for SBS-3?

    Or do I get it all wrong?

  7. #17
    Captain Anmer's Avatar
    Join Date
    Apr 2010
    Posts
    1,089
    Quote Originally Posted by whz View Post
    Thiis seems to be a different format for SBS-3?

    Or do I get it all wrong?
    Yes the API is for the SBS-3 and later models.
    Mike


    www.radarspotting.com

    Radarspotting since 2005

  8. #18
    Passenger
    Join Date
    Jun 2012
    Posts
    28
    Willi,

    Adsbox decoding is fully compatible with FR24. I use adsbox nearly a year. You can write to the author and receive the latest version (I use version from July 28).

  9. #19
    Administrator Mike's Avatar
    Join Date
    Feb 2010
    Location
    Sweden
    Posts
    2,982
    Linux feeder software for ARM without decoder: https://dl.dropbox.com/u/66906/fr24feed_arm-le_222.tgz
    "fr24feed_arm-le_222 --fr24key=SHARING_KEY" to start

  10. #20
    Passenger
    Join Date
    Jun 2012
    Posts
    28
    Hi Mike,

    I cannot run the binary (as root):

    -sh: ./fr24feed_arm-le_222: not found

    # ls -l
    -rwxr-xr-x 1 101 users 125436 Sep 21 18:08 fr24feed_arm-le_222

    Maybe, it isn't recognized as an ARM executable? Or it needs some external lib?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •