Announcement

Collapse
No announcement yet.

New to feeding with Radarbox

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New to feeding with Radarbox

    Hi, I've had my RadarBox since 2008 but just received FlightRadar24 feed program. However I'm not completely sure that I'm actually sharing what I'm receiving with my antenna.

    I've inserted my sharing key.

    Alias: EKRK2
    Position: N55.580 E12.130
    GND: YES Mode-S: YES
    Protocol: udp
    Basestation: OK [21 AC]
    Network: OK [0.00MB/0.31MB]
    Info: N/A
    TX Loss: 1,9%

    The little sqaure "icon" in top left corner on the feed program is flashing green and the lower right is just yellow.

    Any thoughts, help and advise is appreciated, thanks

  • #2
    Hi from T-EDLM1,.

    What I see above is...: that your sending (Uploading ) 21A/cs

    BUT.! would suggest that you Stop the Uploader and restart it.

    Due to your TX Loss: 1,9%

    My TX Loss shows 0.0%
    (F-EDLE1)delcomp-DEL-David Tks(My friend Mike, all three of them)

    URL: http://banner.flightdiary.net/EDLM
    1090SJ(Ae) /(6m. Ecoflex10) / SBS 3 /-FR24 Box/ Power-line Connection (Ethernet)

    Comment


    • #3
      Alright thanks.
      So if I'm not seeing myself on the website it is because someone else is already covering that aircraft? TX Loss down to 0% again

      delcomp

      Rgr,. that is corrct..But you can see how many planes are being uploaded
      by the

      Basestation: OK [ ?? ]
      Last edited by delcomp; 2012-06-28, 09:46.

      Comment


      • #4
        Yes, currently 18

        Comment


        • #5
          Ok, I've seen two so far on T-EKRK2, so it is working, thanks

          delcomp
          I didnt want to compare mine with yours and why I didnt say anything.
          (different area)
          Your next job is to download the Premium program,. which gets rid of
          the Adverts on your map,and gives your Upload Status.

          Mike Speedy,. We need a Thread,. just and only for Feeders
          maybe this could be it,. if it blocked off somehow ??
          Last edited by delcomp; 2012-06-28, 12:38.

          Comment

          Working...
          X