Results 1 to 3 of 3

Thread: USB reset

  1. #1
    Flight attendant controller's Avatar
    Join Date
    Apr 2010
    Location
    Wiesbaden, EDDF, Germany
    Posts
    67

    USB reset

    Hy,

    Im using the airnav Radarbox (EDDF).

    The Problem is that after a while the usb connection to the receiver gets lost.

    Im solving the problem resetting the port each hour with a batch :

    devcon disable *VID_0403*

    devcon enable *VID_0403*

    exit

    My question is has anybody a skript that checks the usb connection and if there is no connection to the receiver than the skript resets the port.

    I want not to reset the port each hour, only when its needed becaus i think its not so good to reset the receiver each hour.

    Best regards,
    Ralph

  2. #2
    Captain
    Join Date
    Apr 2010
    Location
    FR24 Feeder
    Posts
    1,232
    Read this thread and see if it's the USB port power shutting down or try another USB Cable.

    AirNav Systems Thread: USB Disconnections....any updates
    http://www.airnavsystems.com/forum/i...p?topic=4642.0
    Last edited by SoCalBrian; 2011-12-23 at 04:47.

  3. #3
    Flight attendant controller's Avatar
    Join Date
    Apr 2010
    Location
    Wiesbaden, EDDF, Germany
    Posts
    67

    Unhappy

    Hy SoCalBrian,

    i tried this and even took an active USB Hub, same Problem.

    So Im searching for a skript that watches after the port and if it does not work resetting it.

    Ralph

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •