Announcement

Collapse
No announcement yet.

Raspberry Pi 4 Support?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Raspberry Pi 4 Support?

    Currently running Pi24 on a Raspberry pi 3B and i'm thinking to buy a Raspberry Pi 4 to host at another site.

    Is the current version supported? and

    Do i need another sharing key for another receiver at a different location?

    Still relatively new to this but its fun!

    Thanks,
    Dexter

  • #2
    You'll need to install via the script, the pi24 image will not work.

    Use Raspbian Buster Lite as a base, you'll have to figure out how to enable ssh if you want that.
    There is a lot of documentation on the web how to make Raspbian run.

    The install script you will go through signup again.
    Don't put in your sharing key, just your E-mail.
    You'll get a new sharing key.

    Comment


    • #3
      Originally posted by wiedehopf View Post
      You'll need to install via the script, the pi24 image will not work.

      Use Raspbian Buster Lite as a base, you'll have to figure out how to enable ssh if you want that.
      There is a lot of documentation on the web how to make Raspbian run.

      The install script you will go through signup again.
      Don't put in your sharing key, just your E-mail.
      You'll get a new sharing key.

      Alright, will do

      Didn't know you could request another by repeating the signup process. I remember i saw in the FAQ that i need to contact support to request another sharing key.

      Thanks for the clarification.

      Comment


      • #4
        Hello,

        any news about Pi 4 support? Installed PI24-2.1.0.img and it does not start. Pi 4 working correctly on NOOBS - Raspbian.
        I am not at easy on Linux, so need step by step instructions if I have to install manually :-)

        Comment


        • #5
          The script command is shown right on the website ....
          The world’s most popular flight tracker. Track planes in real-time on our flight tracker map and get up-to-date flight status & airport information.

          Code:
          sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"
          Might need to reboot after you are done.

          If you want a more elaborate local webinterface, try: https://github.com/wiedehopf/adsb-sc...for-dump1090fa
          Last edited by wiedehopf; 2019-11-07, 17:38.

          Comment

          Working...
          X