Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Odroid XU4 running off an airspy

  1. #11
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    Ok thanks for you help. I have got it feeding FR24 now, just checking some other things stand by. Used your muta 1.15 installl ABC

  2. #12
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    Right got it sorted out. Flightaware getting data, FR24 receiving data, can see a skyaware 8080 map. Just got to do a few changes, your tar1090 and graphs wiedehoph. Only 1 hiccup, forgot to do the airspy script but once done, all up and running. I think there might be, but is there a local FR map where you just see your detections??

  3. #13
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    Used your "How to Install dump1090-mutability_1.15~dev on RPi" post ABCD, which sort of back to front to get to the FR feed but worked no issues.

  4. #14
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    One question FR24 wise, it seems to have picked a more distant local airport for my ID, not our local 5 k away, can you change that?

  5. #15
    Passenger
    Join Date
    Sep 2019
    Posts
    22
    Quote Originally Posted by orion_jb2001 View Post
    Right got it sorted out. Flightaware getting data, FR24 receiving data, can see a skyaware 8080 map. Just got to do a few changes, your tar1090 and graphs wiedehoph. Only 1 hiccup, forgot to do the airspy script but once done, all up and running. I think there might be, but is there a local FR map where you just see your detections??
    http://your.internal.network.ip/dump1090-fa and also /graphs1090

  6. #16
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,865
    Quote Originally Posted by colinLPL View Post
    He has dump1090-mutability, so it should be without fa at the end, i.e. should be http://your.internal.network.ip/dump1090

  7. #17
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    Thanks both and of course you can see your station's detection's via dump 1090 or tar 1090. I was wondering if FR had a similar map as to FA's skyview for you station as well as their world wide map.

  8. #18
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    And set up the main sd card for the unit after the test card went ok, no problems again. Will be putting it on an emmc card when it arrives

  9. #19
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,865
    Quote Originally Posted by orion_jb2001 View Post
    Thanks both and of course you can see your station's detection's via dump 1090 or tar 1090. I was wondering if FR had a similar map as to FA's skyview for you station as well as their world wide map.
    If you choose setting "receiver=dvbt", the FR24 feeder installs and uses dump1090-mutab v 1.14 to decode signals as well as to display its map. Otherwise with setting "receiver=beast-tcp" and "host=127.0.0.1:30005", it uses decoder and map of dump1090 mutab v 1.15 or dump1090-fa, whichever you have installed.

    If you have already installed ver 1.15~dev and chooe setting "receiver=dvbt", FR24 feeder will downgrade ver 1.15 to ver 1.14
    Last edited by abcd567; 2019-10-06 at 18:24.

  10. #20
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    Thanks saw all those warnings but followed your suggestion per the post, mode s beast , all good

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •