Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Odroid XU4 running off an airspy

  1. #1
    Passenger
    Join Date
    Oct 2019
    Posts
    14

    Odroid XU4 running off an airspy

    Hi,

    I currently feed of my Radacape but want to add my Odroid XU4 to FR24. Now I have dabbled with adding FR24 to my current FA feed running on the Odroid XU4 but there are a few issues so far. So I am thinking about just running a pure FR24 on the Odroid. I have a script for the Airspy to work with the Odroid which works, so just checking which FR24 install option I should go. I take it I should use the Linux option Linux archive amd64/x86_64 or ????

    Jeff

  2. #2
    Captain
    Join Date
    Apr 2018
    Posts
    863
    https://github.com/wiedehopf/adsb-wi...ng-dump1090-fa

    Here are some notes included on how to configure fr24feed for working with dump1090-fa.
    That's after installing with the script.

  3. #3
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    Yes, I was just looking at that thread. So to confirm, which FR24 option should I use.
    Last edited by orion_jb2001; 2019-10-06 at 04:01.

  4. #4
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,852
    Quote Originally Posted by orion_jb2001 View Post
    Yes, I was just looking at that thread. So to confirm, which FR24 option should I use, the Linux archive amd64/x86_64 image??
    Is cpu of Odroid XU4 i386/i686/amd64?
    What is output of following command?
    Code:
    lscpu

  5. #5
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    Hmmm not having much luck here at all. FR24 instructions are a bit vague compared to other ADS B programs.

  6. #6
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    ```
    Architecture: armv7l
    Byte Order: Little Endian
    CPU(s): 8
    On-line CPU(s) list: 0-7
    Thread(s) per core: 1
    Core(s) per socket: 4
    Socket(s): 2
    Vendor ID: ARM
    Model: 3
    Model name: Cortex-A7
    Stepping: r0p3
    CPU max MHz: 2000.0000
    CPU min MHz: 200.0000
    BogoMIPS: 90.00
    Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae
    ```

  7. #7
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    I am aming for just a FR24 application. I may add flightaware feed later, but those scripts you have made look fairly straight forward.

  8. #8
    Passenger
    Join Date
    Oct 2019
    Posts
    14
    root@odroidxu4:~# fr24feed-status
    * FR24 Feeder/Decoder Process: running
    * FR24 Stats Timestamp: 2019-10-06 04:48:21
    * FR24 Link: connected [UDP]
    * FR24 Radar: T-YGDH1
    * FR24 Tracked AC:
    * Receiver: down
    * FR24 MLAT: not running

  9. #9
    Captain
    Join Date
    Apr 2018
    Posts
    863
    Run this script if the instructions are too much for you:
    https://github.com/wiedehopf/adsb-wi...or-dump1090-fa

    Or just get the bundle:
    https://github.com/wiedehopf/adsb-sc...for-dump1090fa

    After that run the airspy-conf script if you are using an Airspy.
    (if you have already run it, run it again!)


    My guess you didn't install dump1090-fa.
    Which airspy-conf requires and the instructions on how to configure fr24feed also require.

  10. #10
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,852
    Quote Originally Posted by orion_jb2001 View Post
    ```
    Architecture: armv7l
    Byte Order: Little Endian
    CPU(s): 8
    On-line CPU(s) list: 0-7
    Thread(s) per core: 1
    Core(s) per socket: 4
    Socket(s): 2
    Vendor ID: ARM
    Model: 3
    Model name: Cortex-A7
    Stepping: r0p3
    CPU max MHz: 2000.0000
    CPU min MHz: 200.0000
    BogoMIPS: 90.00
    Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae
    ```
    CPU is armv7l. Same method as that for Raspberry Pi, will apply for installing FR24 feeder and Flightaware feeder.

    (1) First install a decoder like dump1090-fa, or dump1090-mutability ver 1.15~dev.
    (2) Next use following script to install FR24 feeder.

    Code:
    sudo bash -c "$(wget -O - https://repo-feed.flightradar24.com/install_fr24_rpi.sh)"
    NOTE: Make sure during settings dialouge, you do not choose "Receiver = DVB-T", choose "Receiver = ModeS Beast (TCP)" and "Host/port = 127.0.0.1:30005"


    In web browser go to following address to access Settings page
    IP-of-Pi:8754/settings.html
    After making any changes, click "Save" button then "Restart" button.
    Both these buttons are at bottom-right of settoings page.
    Please see screeshot of settings page below.

    FR24 settings - External dump1090 - BEAST-TCP.png

    NOTE 2:
    In this forum, to post code, do not use ``` . Instead use [/code] below and [code] above.
    Last edited by abcd567; 2019-10-06 at 08:08.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •