Page 5 of 5 FirstFirst ... 345
Results 41 to 48 of 48

Thread: Online - No Data after moving my setup

  1. #41
    Passenger
    Join Date
    Oct 2019
    Posts
    29
    pi@raspberrypi:~ $ cat /etc/fr24feed.ini
    receiver="dvbt"
    fr24key=""
    host="127.0.0.1:30005"
    path="/usr/lib/fr24/dump1090"
    bs="no"
    raw="no"
    logmode="2"
    windowmode="0"
    logpath="/var/log/fr24feed"
    mpx="no"
    mlat="yes"
    mlat-without-gps="yes"

  2. #42
    Captain
    Join Date
    Apr 2018
    Posts
    874
    Didn't you run https://github.com/wiedehopf/adsb-sc...for-dump1090fa ?
    That should have changed the configuration.

    No matter you can adjust the configuration as explained here:
    https://github.com/wiedehopf/adsb-wi...ng-dump1090-fa

    receiver needs to be set to "beast-tcp"
    the rest of the config looks fine.

  3. #43
    Passenger
    Join Date
    Oct 2019
    Posts
    29
    I ran it.
    As sayd, im kind of a newbie with this thing, but I think Im running both 1090-fa and the fr24feed that was previously installed.
    Does it make sense?
    will try again

  4. #44
    Captain
    Join Date
    Apr 2018
    Posts
    874
    Check the config again please:

    cat /etc/fr24feed.ini

    Should no longer say dvbt for receiver.

  5. #45
    Passenger
    Join Date
    Oct 2019
    Posts
    29
    Seems to be back on track.
    frworkingagain.jpg

    still no hits, but should update soon. Low traffic in the area this time.

    Ill take a look at your past messages and the links for the filter for buying next month

    thanks a lot
    God bless you

    Willian
    Brazil

  6. #46
    Captain
    Join Date
    Apr 2018
    Posts
    874
    Don't forget the aluminium foil on the cardboard
    Cardboard alone won't help :P

    Good luck!

  7. #47
    Passenger
    Join Date
    Oct 2019
    Posts
    29
    thanks for the tip.
    I tought it was one or another!

  8. #48
    Captain
    Join Date
    Apr 2018
    Posts
    874
    Cardboard won't block the electromagnetic waves from the tower, for that you need metal!

    So if you have some old sheet of metal lying around, you can use that as well.
    Should be as high as the antenna, and maybe half a meter wide.

    Then try to position it in the right spot between antenna and mobile tower.
    If it's half a meter wide, maybe put it 1.5 m away initially to see if it works.
    (will block a good part of the sky)
    I'm not sure how well it will work, but then you can move it further away to block only the tower.

    With a narrower piece of w/e you will need to put it closer to the antenna obviously.
    Think of the tower as shining light, and the antenna needs to be in the shadow.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •