Quote Originally Posted by wiedehopf View Post
Just get Raspbian Buster Lite running on your RPi and familiarize yourself how to use Putty to connect to it.

Here you get the image, choose the Lite image: https://www.raspberrypi.org/downloads/raspbian/

If you are starting without keyboard/screen connected, you can use step3 here https://www.raspberrypi.org/document...te-access/ssh/ to enable SSH.
It's easiest to start using a Ethernet cable. After switching on the RPi, you'll need to check the router to find out the IP address.
Then connect as explained here: https://www.raspberrypi.org/document...ssh/windows.md

After having connected, you can use raspi-config to further configure the Pi: https://www.raspberrypi.org/document...aspi-config.md

Now you should be ready to install feed software
Thanks wiedehopf, much appreciated advice. I will get the little guy working to the point before loading the traffic feeds and during this months wait, get my 1090MHz antenna built. Feels like waiting for Christmas..