Hi
I am a total newbi to Raspberry Pi.
After seeing a webpage describing how easy it is to feed data, I bought a 3B+ and a RTL-SDR V3-based kit. I setup the Pi with a new install, updated the system with sudo apt-get update and sudo apt-get upgrade-dist.
I then ran the command
to install the feed. Followed the questions and filled out everything and I ended up with a working installation, or so I thought.
I can access the webpage on the ip-address:8754 but it does not feed any aircraft.
At first I checked for the fr24feed-status and get the following result:
So, the Receiver is down, but I'm not quite sure as to why or how to fix it. When testing the dongle, it seems it is fine and working as described in a post here:
When running the fr24feed directly I do get the following output with the ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded. Is this the problem?
After that, I tried to start the service again and get the following error messages.
How can I fix this to connect to the receiver? Thanks a lot for your help.
I am a total newbi to Raspberry Pi.
After seeing a webpage describing how easy it is to feed data, I bought a 3B+ and a RTL-SDR V3-based kit. I setup the Pi with a new install, updated the system with sudo apt-get update and sudo apt-get upgrade-dist.
I then ran the command
Code:
sudo bash -c "$(wget -O - hxxp://repo.feed.flightradar24.com/install_fr24_rpi.sh)"
I can access the webpage on the ip-address:8754 but it does not feed any aircraft.
At first I checked for the fr24feed-status and get the following result:
Code:
pi@raspberrypi:~ $ fr24feed-status [ ok ] FR24 Feeder/Decoder Process: running. [ ok ] FR24 Stats Timestamp: 2019-08-10 12:19:18. [ ok ] FR24 Link: connected [UDP]. [ ok ] FR24 Radar: T-VHHH169. [ ok ] FR24 Tracked AC:. [FAIL] Receiver: down ... failed! [FAIL] FR24 MLAT: not running ... failed!
Code:
pi@raspberrypi:~ $ sudo systemctl stop fr24feed pi@raspberrypi:~ $ sudo systemctl stop dump1090-mutability pi@raspberrypi:~ $ rtl_test -t Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000001 Using device 0: Generic RTL2832U OEM Found Rafael Micro R820T tuner Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6 [R82XX] PLL not locked! Sampling at 2048000 S/s. No E4000 tuner found, aborting.
Code:
pi@raspberrypi:~ $ sudo systemctl start dump1090-mutability pi@raspberrypi:~ $ sudo fr24feed 2019-08-10 20:20:44 | ______ _ _ _ _ _ _____ ___ 2019-08-10 20:20:44 | | ___|| |(_) | | | | | | / __ \ / | 2019-08-10 20:20:44 | | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| | 2019-08-10 20:20:44 | | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| | 2019-08-10 20:20:44 | | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ | 2019-08-10 20:20:44 | \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/ 2019-08-10 20:20:44 | __/ | 2019-08-10 20:20:44 | |___/ 2019-08-10 20:20:44 | [main][i]FR24 Feeder/Decoder 2019-08-10 20:20:44 | [main][i]Version: 1.0.23-8/generic 2019-08-10 20:20:44 | [main][i]Built on Oct 16 2018 08:10:47 (HEAD-2d57e58.git/Linux/static_armel) 2019-08-10 20:20:44 | [main][i]Running on: raspbian10 2019-08-10 20:20:44 | [main][i]Local IP(s): 192.168.5.59 2019-08-10 20:20:44 | [main][i]Copyright 2012-2018 Flightradar24 AB 2019-08-10 20:20:44 | [main][i]DNS mode: PING 2019-08-10 20:20:44 | [main][i]Automatic updates are ENABLED 2019-08-10 20:20:44 | ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded 2019-08-10 20:20:44 | [httpd][i]Server started, listening on 0.0.0.0:8754 2019-08-10 20:20:44 | [main][i]Reader thread started 2019-08-10 20:20:44 | [reader][i]Initializing reader 2019-08-10 20:20:44 | [main][i]MLAT data feed started 2019-08-10 20:20:44 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:20:44 | [master][i]Starting processing thread 2019-08-10 20:20:44 | [mlat][i]Waiting for MLAT configuration 2019-08-10 20:20:44 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:20:44 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:20:44 | [reader][i]Connection terminated 2019-08-10 20:20:44 | [main][i]Terminating child process 1317 with SIGTERM 2019-08-10 20:20:45 | [time][i]Synchronizing time via NTP 2019-08-10 20:20:50 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:20:50 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:20:50 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:20:50 | [reader][i]Connection terminated 2019-08-10 20:20:50 | [main][i]Terminating child process 1327 with SIGTERM ... bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:21:34 | [reader][i]Connection terminated 2019-08-10 20:21:34 | [main][i]Terminating child process 1366 with SIGTERM 2019-08-10 20:21:35 | [feed][i]configuring decoder 2019-08-10 20:21:35 | [feed][c]Max range AIR: 350.0nm 2019-08-10 20:21:35 | [feed][c]Max range GND: 100.0nm 2019-08-10 20:21:35 | [feed][i]configuration changed 2019-08-10 20:21:35 | [feed][i]defined 3 servers 2019-08-10 20:21:35 | [feed][c]Timestamps: optional 2019-08-10 20:21:35 | [feed][n]VHHXXNNN@185.xx.xx.xx:8099/UDP 2019-08-10 20:21:35 | [stats][i]Stats thread started 2019-08-10 20:21:35 | [feed][n]connecting 2019-08-10 20:21:36 | info | Stopping ReceiverACSender threads for feed 2019-08-10 20:21:36 | info | Configured ReceiverACSender: 185.xx.xx.xx:8099,185.xx.xx.xx:8099,185.xx.xx.xx:8099, feed: VHHXXNNN, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true 2019-08-10 20:21:36 | info | Network thread connecting to 185.xx.xx.xx:8099 for feed VHHXXNNN 2019-08-10 20:21:36 | [feed][n]connected via UDP (fd 14) 2019-08-10 20:21:36 | [feed][i]Feed connected 2019-08-10 20:21:36 | [feed][n]working ... 2019-08-10 20:22:18 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:22:18 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:22:18 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:22:18 | [reader][i]Connection terminated 2019-08-10 20:22:18 | [main][i]Terminating child process 1377 with SIGTERM 2019-08-10 20:22:23 | [reader][i]Connecting to DVBT receiver via (exe:///usr/lib/fr24/dump1090 --raw --mlat) 2019-08-10 20:22:23 | [reader][i]Connected to the receiver, configuring 2019-08-10 20:22:23 | [reader][i]Configured, processing messages bash: /usr/lib/fr24/dump1090: No such file or directory 2019-08-10 20:22:23 | [reader][i]Connection terminated 2019-08-10 20:22:23 | [main][i]Terminating child process 1378 with SIGTERM ^C2019-08-10 20:22:24 | [main][i]Terminating on user request 2019-08-10 20:22:24 | [main][i]Terminating worker threads 2019-08-10 20:22:24 | [reader][i]Terminating on request 2019-08-10 20:22:24 | [master][i]Terminating on request 2019-08-10 20:22:24 | [feed][x]Feeding thread terminated 2019-08-10 20:22:24 | [feed][n]busy 2019-08-10 20:22:24 | [feed][i]Feed disconnected 2019-08-10 20:22:24 | [feed][n]disconnected 2019-08-10 20:22:24 | info | Stopping ReceiverACSender threads for feed VHHXXNNN 2019-08-10 20:22:24 | warning | Exited network thread for feed VHHXXNNN 2019-08-10 20:22:24 | info | Joined network thread for feed VHHXXNNN 2019-08-10 20:22:26 | [httpd][d]Master thread terminated 2019-08-10 20:22:26 | [main][i]Terminated successfully
Code:
pi@raspberrypi:~ $ sudo systemctl start fr24feed Job for fr24feed.service failed because the control process exited with error code. See "systemctl status fr24feed.service" and "journalctl -xe" for details.
Code:
pi@raspberrypi:~ $ systemctl status fr24feed.service ● fr24feed.service - Flightradar24 Decoder & Feeder Loaded: loaded (/etc/systemd/system/fr24feed.service; enabled; vendor preset: enabled) Active: activating (start-pre) since Sat 2019-08-10 20:23:11 HKT; 18s ago Cntrl PID: 1805 (install_dump109) Tasks: 4 (limit: 1604) Memory: 68.9M CGroup: /system.slice/fr24feed.service Aug 10 20:23:11 raspberrypi systemd[1]: Starting Flightradar24 Decoder & Feeder... Aug 10 20:23:30 raspberrypi systemd[1]: fr24feed.service: Control process exited, code=exited Aug 10 20:23:30 raspberrypi systemd[1]: fr24feed.service: Failed with result 'exit-code'. Aug 10 20:23:30 raspberrypi systemd[1]: Failed to start Flightradar24 Decoder & Feeder. pi@raspberrypi:~ $ journalctl -xe -- Subject: Automatic restarting of a unit has been scheduled -- Defined-By: systemd -- -- Automatic restarting of the unit fr24feed.service has been scheduled, as the result for -- the configured Restart= setting for the unit. Aug 10 20:23:31 raspberrypi systemd[1]: Stopped Flightradar24 Decoder & Feeder. -- Subject: A stop job for unit fr24feed.service has finished -- Defined-By: systemd -- -- A stop job for unit fr24feed.service has finished. -- -- The job identifier is 1300 and the job result is done. Aug 10 20:23:31 raspberrypi systemd[1]: Starting Flightradar24 Decoder & Feeder... -- Subject: A start job for unit fr24feed.service has begun execution -- Defined-By: systemd -- -- A start job for unit fr24feed.service has begun execution. -- -- The job identifier is 1300. Aug 10 20:23:46 raspberrypi systemd[1]: Reloading. pi@raspberrypi:~ $
How can I fix this to connect to the receiver? Thanks a lot for your help.
Comment