Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 51

Thread: Transferred from windows to Pi - different code

  1. #31
    Passenger
    Join Date
    Jul 2014
    Posts
    24
    Quote Originally Posted by Oblivian View Post
    Re targeting me as unhelpful for asking the question.

    Please remember I'm a user too. I taught myself just like most.
    Support staff on email would have probably asked the similar questions
    Oblivian
    Very sorry if you thought I was suggesting you were unhelpful, having been on the receiving end of users questions I fully understand you have to know how they got to where they are before you can help.

    Absolutely NO slight intended towards you!

    I'm very grateful to all those who are trying to help me.

  2. #32
    Passenger
    Join Date
    Jul 2014
    Posts
    24
    ABDC et al
    Thanks for all your help.
    I reran the installation...again, and this time got to the sign up page.
    It reported my email and feeder code didn't match. ( I have had several different feeder numbers whilst trying to get back on-line.)
    By coincidence at exactly this time I received an email from FR24, saying they missed me, and did I have a problem as I hadn't fed for a while?
    So my attempts are on hold whilst they sort out what feeder code they think I should use.
    Once that's sorted I'll be back using ABCD's sign on and wiedehopf's IP6 blockers.
    I am not dead, just sleeping!
    D

  3. #33
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,001
    DONT TRY AND ACTIVATE THE IMAGE


    Every time you do, you will get a new code and start rejecting your email address - The instructions were given prior how to get around it

    Unfortunately, it involves that SSH session.

    https://forum.flightradar24.com/thre...l=1#post124121

    Do NOT use above command. Use following command:

    fr24feed --signup
    Login to the page, and it will list them. (but it should find you on email alone)

    https://www.flightradar24.com/account/data-sharing 4th column
    Last edited by Oblivian; 2019-07-22 at 08:55.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  4. #34
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,748
    Log-in to your FR24 account and go to this page to find feeder keys:

    https://www.flightradar24.com/account/data-sharing

    Screenshot_20190722-055144_Samsung Internet.jpg

  5. #35
    Passenger
    Join Date
    Jul 2014
    Posts
    24

    two steps forward one step back

    Thanks folk, I think I'm getting closer.
    FR have corrected the email they had on file.
    I followed ABCD's excellent guide literally "to the letter" and using "fr24feed --signup" I have got through ALMOST all of the sign up process.
    so
    Imagine the joy seeing:
    Congratulations! You are now registered and ready to share ADS-D data with Flightradar24.
    + Your radar id is T-EGHH99, please include it in all email communication with us.
    + Please make sure to start sharing data within one month from now as otherwise your ID/KEY will be deleted.
    Thank you for supporting Flightradar24! We hope that you will enjoy our Premium services that will be available to you when you become an active feeder.
    To start sending data now please execute:
    sudo systemctl start fr24feed


    BUT
    Imagine the disappointment at seeing:

    Saving settings to /etc/fr24feed.ini...ERROR

    Full of hope I entered :
    sudo systemctl restart fr24feed
    with no effect and fr24feed -status gave [Fail] FR24 Feeder/Decoder Process ........ failed!
    In the best traditions of computing I have tried rebooting Pi and executing the restart but there is no change.

    I wonder why it couldn't save the ini file? (Yes I have checked the write protect switch on the SD card!)

  6. #36
    Passenger
    Join Date
    Jul 2014
    Posts
    24
    Thanks. both.
    Following your instructions
    Feeder key found, exactly as I had saved it.
    Customer services confirm they had the wrong email on the account, although they wrote to the correct one!

  7. #37
    Passenger
    Join Date
    Jul 2014
    Posts
    24

    ABCD's STEP-7: Checks

    Status in PuTTY : [FAIL] FR24 Feeder/Decoder Process ... failed!
    Status in Browser: and Settings 192.168.0.23 refused to connect.
    check that dump1090 is working http://192.168.0.23/dump1090/gmap.html
    Gave a map, two clocks but 0 aircraft and a yellow box with:
    Problem fetching data from dump1090.
    AJAX call failed (error: Not Found). Maybe dump1090 is no longer running?
    The displayed map data will be out of date.

    Unsurprisingly I'm stumped

  8. #38
    Captain
    Join Date
    Apr 2018
    Posts
    742
    The fr24feed install has an error which can result in the inability to write to disk, maybe that's why fr24feed.ini couldn't be saved.
    Can be fixed like this:

    Code:
    sudo mount -o remount,rw /
    sudo sed -i -e 's?$(mount | grep " on / " | grep rw)?{ mount | grep " on / " | grep rw; }?' /usr/lib/fr24/fr24feed_updater.sh &>/dev/null
    After running the signup again it will hopefully save the fr24feed.ini


    My bundle install fixes that bug as well, but as you had bad luck getting it to actually complete, i'm hesistant to recommend it again.

    It doesn't change the settings unless it can install dump1090-fa, so you might just try it one more time and see if it installs dump1090-fa this time around
    Code:
    sudo bash -c "$(wget -q -O - raw.githubusercontent.com/wiedehopf/adsb-wiki/master/install-complete.sh)"

  9. #39
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,748
    It is due to Pi24 read only system
    Issue following commands, then run signup again

    sudo mount -o remount,rw /
    sudo touch /etc/fr24feed.ini
    sudo chmod a+rw /etc/fr24feed.ini

  10. #40
    Passenger
    Join Date
    Jul 2014
    Posts
    24
    Thanks wiedohopf
    That got it to save the ini file.
    FR24 actually say I'm online, but not feeding any aircraft!
    Feeder status in browser is:
    Linux/generic/static_armel/1.0.23-8
    Updated: 19:33:45 GMT+0100 (British Summer Time)
    FR24 Link: Connected via UDP
    FR24 Radar Code: T-EGHH96
    Local IP(s): 192.168.0.23
    Aircraft Tracked:
    (ModeS & ADS-B) 0
    Aircraft Uploaded: N/A
    Receiver: dvbt, Connected
    MLAT running: NO

    Running status on the Pi gives this:
    pi@raspberrypi:~ $ fr24feed -status
    /dev/shm/decoder.txt: Permission denied
    [main][e]Could not create monitor file!
    Could not open /var/log/fr24feed/fr24feed.log for writing!
    ______ _ _ _ _ _ _____ ___
    | ___|| |(_) | | | | | | / __ \ / |
    | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
    | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
    | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
    \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
    __/ |
    |___/
    [main][i]FR24 Feeder/Decoder
    [main][i]Version: 1.0.23-8/generic
    [main][i]Built on Oct 11 2018 18:27:28 (HEAD-3c696a7.git/Linux/static_armel)
    [main][i]Running on: pi24-raspbian9
    [main][i]Local IP(s): 192.168.0.23
    [main][i]Copyright 2012-2018 Flightradar24 AB
    [main][i]https://www.flightradar24.com
    [main][i]DNS mode: PING
    [main][i]Automatic updates are ENABLED
    ERROR: rmmod: ERROR: ../libkmod/libkmod-module.c:793 kmod_module_remove_module() could not remove 'dvb_usb_rtl28xxu': Operation not permitted
    rmmod: ERROR: could not remove module dvb_usb_rtl28xxu: Operation not permitted
    [main][i]Reader thread started
    [main][i]MLAT data feed started
    [reader][i]Initializing reader
    [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw --mlat)
    [master][i]Starting processing thread
    [mlat][i]Waiting for MLAT configuration
    [httpd][e]bind function failed, errno: 98
    [httpd][d]Master thread terminated
    [reader][i]Connected to the receiver, configuring
    [reader][i]Configured, processing messages
    Mon Jul 22 18:32:12 2019 UTC dump1090-mutability v1.14 starting up.
    Found 1 device(s):
    0: Generic, RTL2832U, SN: 77771111153705700 (currently selected)
    Detached kernel driver
    rtlsdr_demod_write_reg failed with -1
    rtlsdr_demod_read_reg failed with -1
    rtlsdr_demod_write_reg failed with -1
    rtlsdr_demod_read_reg failed with -1
    rtlsdr_demod_write_reg failed with -1
    rtlsdr_demod_read_reg failed with -1


    And then much more in the same vein.

    I particularly note:
    /dev/shm/decoder.txt: Permission denied
    [main][e]Could not create monitor file!
    Could not open /var/log/fr24feed/fr24feed.log for writing!
    near the beginning.

    I've had enough for tonight but will try your package again tomorrow.

    Do I need to reformat the SD and start from there or can I just run your command from the prompt?

    All the best
    D

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •