Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Raspberry Pi with 3.5" LCD

  1. #11
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    4,964
    You need SUDO infront of each command (that will need to edit or change a file) to give elevated rights/permissions.

    Start there and have another go.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  2. #12
    Captain
    Join Date
    Apr 2018
    Posts
    699
    you can do this once before all the commands:

    Code:
    sudo su -l
    This means you will be logged in as root and have sufficient permissions.

    Be careful, with this little understanding you might destroy your system on accident.
    (make it not boot anymore)

    Good luck.

  3. #13
    Passenger
    Join Date
    Jul 2019
    Posts
    9
    Thanks Wiedehopf, but it seems like Im going to need more than good luck?

    pi@raspberrypi:~ $ sudo su -l

    SSH is enabled and the default password for the 'pi' user has not been changed.
    This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.


    root@raspberrypi:~# mkdir -p /etc/systemd/system/getty@tty1.service.d
    root@raspberrypi:~# echo "[Service]" > /etc/systemd/system/getty@tty1.service.d/override.conf
    -su: /etc/systemd/system/getty@tty1.service.d/override.conf: Read-only file system

  4. #14
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    4,964
    Quote Originally Posted by kiwiandy View Post
    Thanks Wiedehopf, but it seems like Im going to need more than good luck?

    pi@raspberrypi:~ $ sudo su -l

    SSH is enabled and the default password for the 'pi' user has not been changed.
    This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.


    root@raspberrypi:~# mkdir -p /etc/systemd/system/getty@tty1.service.d
    root@raspberrypi:~# echo "[Service]" > /etc/systemd/system/getty@tty1.service.d/override.conf
    -su: /etc/systemd/system/getty@tty1.service.d/override.conf: Read-only file system

    Pi image by chance?


    NOTE: The Pi24 image sometimes mounts as "read-only file system". As a result installation of other feeders fails and gives erro messages. In this case first change read-only file system to read & write system by following command, then try again to install other feeders.
    Code:
    sudo mount -o remount,rw /
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  5. #15
    Passenger
    Join Date
    Jul 2019
    Posts
    9
    Quote Originally Posted by Oblivian View Post
    Pi image by chance?
    Thanks very much!.. that did the trick!... all working now

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •