Results 1 to 9 of 9

Thread: Dump1090 - error 404 - PiAware + FR24

  1. #1
    Passenger
    Join Date
    Jun 2019
    Posts
    4

    Question Dump1090 - error 404 - PiAware + FR24

    I need some help if you would be so kind. Dump1090 shows error 404.

    I am using:
    • FlightAware ProStick Plus
    • RPi 3B+
    • PiAware pre-installed (dump1090-fa is working now)

    + just installed FR24 using sudo bash -c "$(wget -O - ......etc.... install_fr24_rpi.sh)", provided all data during configuration, typed everything in settings in IP-of-Pi:8754 (as per the Settings page image in the #2 post: 2019-PI24-QuickStart-Guide).

    Changed receiver to Beast TCP (as per the thread BUG-receiver-type-avr-tcp-and-auto-configuration-not-working) but dump1090 still isn't working. IP-of-Pi/dump1090 returns "404 - Not Found"

    What am I doing wrong?

    Attachment 10788

  2. #2
    Captain
    Join Date
    Apr 2018
    Posts
    610
    dump1090-fa is reachable at http://Ip-of-Pi/dump1090-fa

    If fr24feed already installed dump1090-mutability because you didn't use the correct settings at the start, follow these steps
    https://github.com/wiedehopf/adsb-wi...ng-dump1090-fa

    you can also use this script:
    https://github.com/wiedehopf/adsb-wi...or-dump1090-fa

    It removes dump1090-mutability and reinstalls dump1090-fa.
    Last edited by wiedehopf; 2019-06-18 at 17:15.

  3. #3
    Passenger
    Join Date
    Jun 2019
    Posts
    4
    Quote Originally Posted by wiedehopf View Post
    dump1090-fa is reachable at [...]
    Thank you, but dump1090-fa is working as it was before FR24. So I understand mutability was NOT installed.

    The FR24's dump1090 is not working.

  4. #4
    Captain
    Join Date
    Apr 2018
    Posts
    610
    you can't have two dump1090 running at the same time.

    (well technically you can but you don't want to, it's complicated and unnecessary)

    fr24feed is getting data from dump1090-fa
    (receiver=beast-tcp and host=127.0.0.1:30005)

    what does

    fr24feed-status

    say?

    Don't really know what the problem is?

  5. #5
    Passenger
    Join Date
    Jun 2019
    Posts
    4
    Looks like the feeder is running, connected, with MLAT on.
    fr24feed-status.png
    Have I typed anything wrong here?
    404-not_found.PNG
    Attached Images Attached Images
    Last edited by FlightStrip; 2019-06-18 at 18:16. Reason: image upside down...

  6. #6
    Captain
    Join Date
    Apr 2018
    Posts
    610
    yes you need to add -fa

    /dump1090-fa

    there is no /dump1090 when running dump1090-fa.

  7. #7
    Passenger
    Join Date
    Jun 2019
    Posts
    4
    So I understand the -fa view is all I will see, no changes to the map or more info etc.
    Thank you!

  8. #8
    Captain
    Join Date
    Apr 2018
    Posts
    610
    I'm not sure what you were expecting.

    you can check this page: http://192.168.0.7:8754
    but no planes on that page.

    dump1090-fa has some more info than dump1090-mutability, indicated airspeed and stuff like that but only if it's queried by your local ATC.

    If you are looking for more features, maybe you want some statistics?
    https://github.com/wiedehopf/graphs1090#graphs1090

    Or a 24h replay of your local data:
    https://github.com/wiedehopf/timelap...#timelapse1090

  9. #9
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,671
    Quote Originally Posted by FlightStrip View Post
    I need some help if you would be so kind. Dump1090 shows error 404.

    I am using:

    PiAware pre-installed (dump1090-fa is working now)
    ....

    typed everything in settings in IP-of-Pi:8754 (as per the Settings page image in the #2 post: 2019-PI24-QuickStart-Guide).

    The settings in that guide are for PI24 image, and do NOT work with Piaware image. The title is very clear "Pi24 Quickstart guide".

    Changed receiver to Beast TCP (as per the thread BUG-receiver-type-avr-tcp-and-auto-configuration-not-working) but dump1090 still isn't working. IP-of-Pi/dump1090 returns "404 - Not Found"

    What am I doing wrong?
    The setting AVR TCP no more works with current version of fr24feed.
    Use Beast TCP, port 30005.
    Please see screenshot below:

    FR24 settings - External dump1090 - BEAST-TCP.png

    Above setting disables fr24feed's built-in dump1090-mutability ver 1.14, and uses data from builtin dump1090-fa of Piaware image.The map is displayed at:

    IP-of-Pi/dump1090-fa/



    Since you have initially chosen Pi24 settings (receiver dvbt), fr24feed has probably already installed dump1090-mutabilty. However it will become inactive when you choose setting receiver Beast-TCP, host/port 127.0.0.1:30005.

    You can check if it is already installed or not by following command:

    Code:
    apt-cache policy dump1090-mutability
    Last edited by abcd567; 2019-06-19 at 14:52.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •