Quote Originally Posted by wiedehopf View Post
Oh it seems you still have an old version, that doesn't handle that properly.
Try these commands:

cd adsb-receiver
git pull

that should give you the current version.

You can get the percentage another way:
https://discussions.flightaware.com/...g-gain/44482/2

You normally need at least a day to compare and even that can be tricky.
Especially because your reception seems rather limited anyway.

Check out this thread:
https://forum.flightradar24.com/thre...h-DVB-T-Dongle
This information is very helpful.

This is the antenna I am currently using:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

It is not yet in its final mounting location. I have it sitting in the top part of a window but plan to move it quite a bit higher. I'm considering outdoor mounting boxes for the Pi once I settle on a location for the antenna. I'm sure outside and higher will give me much better coverage.

I'm also not sure I am getting the gain adjustment correct. Not knowing the following command:

sudo systemctl restart dump1090-fa

I have simply been rebooting the Pi after I made the gain change settings.