Hey there,
I´m new to the whole topic ADS-B and don´t get any positive results with my DVB-T Stick on my Raspberry-Pi.
Mac
OS: Mojave 10.14.5
Stick: NooElec TV28T v2
ioreg on mac: "RTL2838UHIDIR"
Output of rtl_test:
Output of dump1090 --interactive --net:
If I configure FR24FeedOSX to use AVR-TCP, it all works fine and the data gets submitted to flightradar24.com.
But I can`t get it to work on my Pi!
Pi
OS: Pi24 from latest Image
Stick: same
lsusb on pi: "Bus 001 Device 007: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T"
Output of rtl_test:
Output of dump1090-mutability is empty.
I`m no expert, but it seems, that the driver for the stick is not set correctly.
Can anyone tell me what to do?
Thank you!
I´m new to the whole topic ADS-B and don´t get any positive results with my DVB-T Stick on my Raspberry-Pi.
Mac
OS: Mojave 10.14.5
Stick: NooElec TV28T v2
ioreg on mac: "RTL2838UHIDIR"
Output of rtl_test:
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
[R82XX] PLL not locked!
Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
[R82XX] PLL not locked!
Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
Hex Flight Altitude Speed Lat Lon Track Messages Seen .
--------------------------------------------------------------------------------
3c0acb 22450 408 51.092 13.873 310 86 1 sec
4b8de5 CAI5MY 36000 427 51.318 12.930 293 254 0 sec
3950cf 38000 419 0.000 0.000 245 3 3 sec
4068b6 TCX362 35000 467 51.113 13.476 129 205 0 sec
--------------------------------------------------------------------------------
3c0acb 22450 408 51.092 13.873 310 86 1 sec
4b8de5 CAI5MY 36000 427 51.318 12.930 293 254 0 sec
3950cf 38000 419 0.000 0.000 245 3 3 sec
4068b6 TCX362 35000 467 51.113 13.476 129 205 0 sec
But I can`t get it to work on my Pi!
Pi
OS: Pi24 from latest Image
Stick: same
lsusb on pi: "Bus 001 Device 007: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T"
Output of rtl_test:
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Detached kernel driver
.
.
.
rtlsdr_demod_read_reg failed with -4
rtlsdr_read_reg failed with -4
rtlsdr_write_reg failed with -4
.
.
.
No supported tuner found
rtlsdr_demod_write_reg failed with -4
.
.
.
Enabled direct sampling mode, input 1
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
.
.
.
Supported gain values (1): 0.0
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
.
.
.
WARNING: Failed to set sample rate.
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_write_reg failed with -4
rtlsdr_write_reg failed with -4
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
Failed to submit transfer 0!
Library error -5, exiting...
rtlsdr_write_reg failed with -4
Reattaching kernel driver failed!
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Detached kernel driver
.
.
.
rtlsdr_demod_read_reg failed with -4
rtlsdr_read_reg failed with -4
rtlsdr_write_reg failed with -4
.
.
.
No supported tuner found
rtlsdr_demod_write_reg failed with -4
.
.
.
Enabled direct sampling mode, input 1
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
.
.
.
Supported gain values (1): 0.0
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
.
.
.
WARNING: Failed to set sample rate.
rtlsdr_demod_write_reg failed with -4
rtlsdr_demod_read_reg failed with -4
rtlsdr_write_reg failed with -4
rtlsdr_write_reg failed with -4
Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
Failed to submit transfer 0!
Library error -5, exiting...
rtlsdr_write_reg failed with -4
Reattaching kernel driver failed!
I`m no expert, but it seems, that the driver for the stick is not set correctly.
Can anyone tell me what to do?
Thank you!
Comment