Page 5 of 7 FirstFirst ... 34567 LastLast
Results 41 to 50 of 61

Thread: PI24: Replace dump1090 v1.14 -> pre-build package of dump1090 v1.15

  1. #41
    Captain
    Join Date
    Apr 2018
    Posts
    750
    sudo apt install lighttpd
    sudo apt purge lighttpd
    sudo apt install lighttpd

    At this point you might need to purge and reinstall your dump1090 version as well.

    sudo lighty-enable-mod dump1090

    Deleting the whole /etc/lighttpd directory is a really bad idea.

  2. #42
    Passenger
    Join Date
    Aug 2019
    Posts
    6
    Thank you for your help, I now have 404 - not found at piip/dump1090
    Last edited by Gomac; 2019-09-06 at 08:17. Reason: typo

  3. #43
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,763
    Code:
    sudo dpkg --purge dump1090-mutability
    cd /usr/lib/fr24/ 
    sudo ./install_dump1090.sh 
    sudo service lighttpd force-reload 
    sudo systemctl restart fr24feed

  4. #44
    Passenger
    Join Date
    Aug 2019
    Posts
    6
    Working again thank you all for your help. Now I must try some of the other gadgets, which means I will probably break it again ;-)

  5. #45
    Passenger
    Join Date
    Mar 2017
    Location
    GCLA
    Posts
    18
    Hi
    So far I just run the automatic script to update from 1.14 to 1.15 but without success.

    What I see is that dumo1090-mutability is not installed.

    At the end of the process I give: service fr24feed status and this is what I get:

    service fr24feed status
    ● fr24feed.service - Flightradar24 Decoder & Feeder
    Loaded: loaded (/etc/systemd/system/fr24feed.service; enabled)
    Active: active (running) since Wed 2019-09-18 16:50:07 CEST; 1min 56s ago
    Process: 1549 ExecStartPre=/usr/lib/fr24/create_missing_directories.sh (code=exited, status=0/SUCCESS)
    Process: 1544 ExecStartPre=/usr/lib/fr24/unregister_kernel_modules.sh (code=exited, status=0/SUCCESS)
    Process: 1509 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=100)
    Main PID: 1553 (fr24feed)
    CGroup: /system.slice/fr24feed.service
    └─1553 /usr/bin/fr24feed

    Sep 18 16:50:07 orangepipcplus systemd[1]: Started Flightradar24 Decoder & Feeder.

    there is no /usr/bin/dump1090-mutability file right now.

    I am getting few error messages while running the script starting from here:

    Get:53 http://apt.armbian.com jessie/main armhf Packages [178 B]
    Err http://apt.armbian.com jessie/main armhf Packages

    Get:54 http://apt.armbian.com jessie/utils armhf Packages [178 B]
    Err http://apt.armbian.com jessie/utils armhf Packages

    Get:55 http://apt.armbian.com jessie/jessie-desktop armhf Packages [178 B]
    Err http://apt.armbian.com jessie/jessie-desktop armhf Packages

    W: There is no public key available for the following key IDs:
    AA8E81B4331F7F50
    W: Failed to fetch http://apt.armbian.com/dists/jessie/...armhf/Packages HttpError404

    W: Failed to fetch http://apt.armbian.com/dists/jessie/...armhf/Packages HttpError404

    W: Failed to fetch http://apt.armbian.com/dists/jessie/...armhf/Packages HttpError404

    W: Failed to fetch http://httpredir.debian.org/debian/d...armhf/Packages 404 Not Found [IP: 151.101.132.204 80]


    .and more

    What do you think about it ?

    Mark
    Orange Pi PC Plus + NooElec NESDR SMArt + homemade 6 ele CoCo

  6. #46
    Passenger
    Join Date
    Aug 2019
    Location
    London(between LHR and LGW)
    Posts
    16
    Quote Originally Posted by perseus68 View Post
    Hi
    So far I just run the automatic script to update from 1.14 to 1.15 but without success.

    What I see is that dumo1090-mutability is not installed.

    At the end of the process I give: service fr24feed status and this is what I get:

    service fr24feed status
    ● fr24feed.service - Flightradar24 Decoder & Feeder
    Loaded: loaded (/etc/systemd/system/fr24feed.service; enabled)
    Active: active (running) since Wed 2019-09-18 16:50:07 CEST; 1min 56s ago
    Process: 1549 ExecStartPre=/usr/lib/fr24/create_missing_directories.sh (code=exited, status=0/SUCCESS)
    Process: 1544 ExecStartPre=/usr/lib/fr24/unregister_kernel_modules.sh (code=exited, status=0/SUCCESS)
    Process: 1509 ExecStartPre=/usr/lib/fr24/install_dump1090.sh (code=exited, status=100)
    Main PID: 1553 (fr24feed)
    CGroup: /system.slice/fr24feed.service
    └─1553 /usr/bin/fr24feed

    Sep 18 16:50:07 orangepipcplus systemd[1]: Started Flightradar24 Decoder & Feeder.

    there is no /usr/bin/dump1090-mutability file right now.

    I am getting few error messages while running the script starting from here:

    Get:53 http://apt.armbian.com jessie/main armhf Packages [178 B]
    Err http://apt.armbian.com jessie/main armhf Packages

    Get:54 http://apt.armbian.com jessie/utils armhf Packages [178 B]
    Err http://apt.armbian.com jessie/utils armhf Packages

    Get:55 http://apt.armbian.com jessie/jessie-desktop armhf Packages [178 B]
    Err http://apt.armbian.com jessie/jessie-desktop armhf Packages

    W: There is no public key available for the following key IDs:
    AA8E81B4331F7F50
    W: Failed to fetch http://apt.armbian.com/dists/jessie/...armhf/Packages HttpError404

    W: Failed to fetch http://apt.armbian.com/dists/jessie/...armhf/Packages HttpError404

    W: Failed to fetch http://apt.armbian.com/dists/jessie/...armhf/Packages HttpError404

    W: Failed to fetch http://httpredir.debian.org/debian/d...armhf/Packages 404 Not Found [IP: 151.101.132.204 80]


    .and more

    What do you think about it ?

    Mark
    Looks like a folder where scrip was getting packages doesn't exist anymore. Bad luck. I don't know if that was removed by ovner or just a mistake..

  7. #47
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,763
    perseus68:

    You have Orangepipcplus and Armbian Jessie.
    The method to replace dump1090 in this thread is for Raspberry Pi / Raspbian Stretch or Buster.

    Code:
    W: Failed to fetch http://apt.armbian.com/dists/jessie/main/binary-armhf/Packages
    Please build dump1090-mutability ver 1.15~dev from source code:

    (1) Go to this post:
    How to Install dump1090-mutability_1.15~dev on RPi

    (2) Scroll down and use this method:
    METHOD-2:
    Build dump1090-mutability_1.15~dev from source

    NOTE:
    Your OS Armbian Jessie is too old. After Jessie, Stretch was released, and after that Buster was released, which is the current OS.
    Last edited by abcd567; 2019-09-18 at 16:33.

  8. #48
    Passenger
    Join Date
    Mar 2017
    Location
    GCLA
    Posts
    18
    Quote Originally Posted by abcd567 View Post
    perseus68:

    You have Orangepipcplus and Armbian Jessie.
    The method to replace dump1090 in this thread is for Raspberry Pi / Raspbian Stretch or Buster.

    Code:
    W: Failed to fetch http://apt.armbian.com/dists/jessie/main/binary-armhf/Packages
    Please build dump1090-mutability ver 1.15~dev from source code:

    (1) Go to this post:
    How to Install dump1090-mutability_1.15~dev on RPi

    (2) Scroll down and use this method:
    METHOD-2:
    Build dump1090-mutability_1.15~dev from source

    NOTE:
    Your OS Armbian Jessie is too old. After Jessie, Stretch was released, and after that Buster was released, which is the current OS.
    Thanks abcd
    Well I tried to follow instructions (Method-2) bur when I get to Step #3 and the /build-dump-mut/dump1090 dir is created
    I look into it and ONLY find a README.md file that says this:

    "# Old dump1090-mutability fork

    dump1090-mutability is no longer maintained; please don't use it for new installs.

    For new installs and ongoing development, try dump1090-fa, which is available at https://github.com/flightaware/dump1090

    The historical master branch is available in the `unmaintained` branch."

    Quite curious....

    The Command: sudo dpkg-buildpackage -b does not work unfortunately

    "tail: cannot open ‘debian/changelog’ for reading: No such file or directory
    dpkg-buildpackage: error: tail of debian/changelog gave error exit status 1"

    Is there a quick way to re-install the old 1.14 instead?
    Then Ill think about buying a new SDcard with a fresh install.
    Orange Pi PC Plus + NooElec NESDR SMArt + homemade 6 ele CoCo

  9. #49
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,007
    Looks like all our guides need updating. He's archived the source 4 days ago to read only and removed files.

    https://github.com/mutability/dump1090

    Interesting to see if fr24 now breaks

    Sent from my EML-L09 using Tapatalk
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  10. #50
    Captain
    Join Date
    Apr 2018
    Posts
    750
    Try this, not sure if it works on jessie but worth a try:
    https://github.com/wiedehopf/adsb-sc...for-dump1090fa

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •