Reason of Failure:
The opensky-network feeder's binary is named openskyd-dump1090. The fr24feeder detects this as some version of dump1090, and does NOT start its integral dump1090-mutability when fr24feed is restarted or RPi is rebooted. This results in failure of all feeders.
Workaround:
Rename the opensky binary and remove dump1090 part of binary's name, so it changes from openskyd-dump1090 to openskyd. Change also the binary's name in file opensky-feeder.service.
Following commands will do the job:
NOTE:
For opensky feeder to get feed from dump1090-mutability, you must add --net in "Process arguments" on following page in your browser:
IP-of-Pi:8754/settings.html
By default this field contains:
--gain -10
After adding --net it will become
--gain -10 --net
The opensky-network feeder's binary is named openskyd-dump1090. The fr24feeder detects this as some version of dump1090, and does NOT start its integral dump1090-mutability when fr24feed is restarted or RPi is rebooted. This results in failure of all feeders.
Workaround:
Rename the opensky binary and remove dump1090 part of binary's name, so it changes from openskyd-dump1090 to openskyd. Change also the binary's name in file opensky-feeder.service.
Following commands will do the job:
Code:
sudo mount -o remount,rw / sudo mv /usr/bin/openskyd-dump1090 /usr/bin/openskyd sudo sed -i 's/openskyd-dump1090/openskyd/g' /lib/systemd/system/opensky-feeder.service sudo systemctl daemon-reload sudo systemctl restart opensky-feeder sudo systemctl restart fr24feed
For opensky feeder to get feed from dump1090-mutability, you must add --net in "Process arguments" on following page in your browser:
IP-of-Pi:8754/settings.html
By default this field contains:
--gain -10
After adding --net it will become
--gain -10 --net