Announcement

Collapse
No announcement yet.

Online but No data

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Online but No data

    the Info is :

    2019-05-11 07:06:58 | [feed][i]Feed connected
    2019-05-11 07:06:58 | [feed][n]working
    2019-05-11 07:06:58 | info | Stopping ReceiverACSender threads for feed
    2019-05-11 07:06:58 | info | Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.2 4:8099, feed: ZBAA1, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true
    2019-05-11 07:06:58 | info | Network thread connecting to 185.218.24.22:8099 for feed ZBAA1
    2019-05-11 07:07:28 | [feed][n]ping 1
    2019-05-11 07:07:29 | [feed][n]syncing stream result: 1
    2019-05-11 07:07:58 | [feed][n]ping 2
    2019-05-11 07:07:59 | [feed][n]syncing stream result: 1

    Is the server down? Yesterday is OK.

    thanks.

  • #2
    Are you using Windows?

    Comment


    • #3
      Originally posted by wiedehopf View Post
      Are you using Windows?
      No. Pi24.
      Yesterday is OK.
      And I can't Ping the ip.

      Comment


      • #4
        Feel free to post/discuss suggestions here http://forum.flightradar24.com/threa...4840#post74840 (http://forum.flightradar24.com/threads/9875-Info-Updates-Ammendments-Placeholder?p=74840#post74840) This guide is not to be taken as officially sourced support information. It is contributor-made Information has been repeated many


        2016-01-27 00:35:36 | [feed][n]ping 1
        2016-01-27 00:36:06 | [feed][n]ping 2
        2016-01-27 00:36:36 | [feed][n]ping 3
        2016-01-27 00:37:06 | [feed][n]ping 4
        2016-01-27 00:37:36 | [feed][n]ping 5
        2016-01-27 00:38:06 | [feed][n]ping 6
        2016-01-27 00:38:36 | [feed][n]ping 7
        No data is being received by hardware to upload
        - Check connections
        - Incorrect data format received from receiver or software for chosen receiver type
        - Wrong port/type specified from software supplying data
        Posts not to be taken as official support representation - Just a helpful uploader who tinkers

        Comment


        • #5
          Pinging 185.218.24.22 with 32 bytes of data:
          Request timed out.
          Request timed out.
          Request timed out.
          Request timed out.
          I don't know why. Is this normal?

          Comment


          • #6
            Originally posted by stargate View Post
            Pinging 185.218.24.22 with 32 bytes of data:
            Request timed out.
            Request timed out.
            Request timed out.
            Request timed out.
            I don't know why. Is this normal?
            Yes, it is. The severs are fine.

            As I posted, You aren't giving the feeder any data to send. So it is keeping the connection open.

            You need to work out why you aren't sending data.

            [feed] is messages from YOUR feeder. [info] is messages from the servers
            Posts not to be taken as official support representation - Just a helpful uploader who tinkers

            Comment


            • #7
              Capture.JPG

              Today's statistic. But suddenly it's stopped. Can't connect to the server 185.218.24.22:8099

              Comment


              • #8
                Originally posted by stargate View Post
                [ATTACH=CONFIG]10601[/ATTACH]

                Today's statistic. But suddenly it's stopped. Can't connect to the server 185.218.24.22:8099
                It's not the statistics. It's your data!

                That server is fine

                telnet 185.218.24.22 8099

                connection sucessful
                Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                Comment


                • #9
                  Run the command

                  sudo fr24feed-status

                  Or look at the data on http://<ip of pi>:8754

                  If that is OK - don't use the statistics page to get info about your feeder - it probably has a fault again
                  Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                  Comment


                  • #10
                    Originally posted by Oblivian View Post
                    Run the command

                    sudo fr24feed-status

                    Or look at the data on http://<ip of pi>:8754

                    If that is OK - don't use the statistics page to get info about your feeder - it probably has a fault again
                    FR24 Link: Connected via UDP
                    FR24 Radar Code: T-ZBAA1
                    Local IP(s): 192.168.1.158
                    Aircraft Tracked:
                    (ModeS & ADS-B) 0
                    Aircraft Uploaded: N/A
                    Receiver: dvbt, Connected
                    MLAT running: NO
                    ________________________________

                    pi@raspberrypi:~ $ sudo fr24feed-status
                    [FAIL] FR24 Feeder/Decoder Process ... failed!

                    So, is that means the dongle broken?
                    Last edited by stargate; 2019-05-11, 08:03.

                    Comment


                    • #11
                      I refer again to my help page
                      Feel free to post/discuss suggestions here http://forum.flightradar24.com/threa...4840#post74840 (http://forum.flightradar24.com/threads/9875-Info-Updates-Ammendments-Placeholder?p=74840#post74840) This guide is not to be taken as officially sourced support information. It is contributor-made Information has been repeated many


                      - Check the basic commands

                      sudo systemctl stop fr24feed

                      sudo systemctl start fr24feed

                      Still not starting or MLAT or other functions are not working? Visually check WHY..
                      - Stop FR24feed

                      sudo systemctl stop fr24feed
                      - Start fr24feed with full output
                      sudo fr24feed ( !! no 'Service' !! )
                      Last edited by Oblivian; 2019-05-11, 08:00.
                      Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                      Comment


                      • #12
                        Check this thread:

                        How To Test If Your DVB-T RTL SDR Dongle Is Healthy Following two options are described below: OPTION-1: Dongle plugged into Raspberry Pi. OPTION-2: Dongle plugged into Windows Computer. . OPTION-1: Dongle plugged into Raspberry Pi. STEP-1: Install the test tools package rtl-sdr sudo apt-get update sudo apt-get install

                        Comment


                        • #13
                          Originally posted by wiedehopf View Post
                          And even April last year I warned about use of @s..
                          Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                          Comment


                          • #14
                            Yeah yeah i got the memo by now. Sorry for being a bit slow. Didn't realize people would answer the same way and that would create a problem.

                            After all it's not a problem for established members to use the @ symbol.
                            It's much easier though than quoting someone and and then deleting most of it so it's not too long.

                            Comment


                            • #15
                              You can shortcut by manual use of quotes. Or just <name>: instead.

                              quote=widehopf]. /quote =

                              Originally posted by widehopf
                              .
                              Be a different story if the software actually supported tagging alert notifications and was helpful. But it doesn't.
                              Just lets users post adverts (and has caught!) for iphones, fake passports and visas with contact email addresses attached. (which I believe is in the antispam addon they have implemented)
                              Posts not to be taken as official support representation - Just a helpful uploader who tinkers

                              Comment

                              Working...
                              X