Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 33

Thread: Successful Feed?

  1. #11
    Passenger
    Join Date
    Dec 2013
    Posts
    30
    Quote Originally Posted by Oblivian View Post
    Also note, if you did override and choose DVBT. It runs a script that may break your FlightAware install.

    Sent from my EML-L09 using Tapatalk
    It did actually. Any idea how to get that back too?

    I'm getting a "This site can't be reached ERR_Connection_Refused" Error.

  2. #12
    Passenger
    Join Date
    Dec 2013
    Posts
    30
    Quote Originally Posted by wiedehopf View Post
    Yeah in that case you used the wrong values.

    You can change the configuration like this:

    Code:
    sudo fr24feed --reconfigure
    Use these values:



    Then you'll need to do another command so that the dump1090-fa webinterface works again:
    Code:
    sudo lighty-disable-mod dump1090
    sudo reboot
    Anyway why would you decline an automatic configuration if you have no clue
    I did do auto config. It just wasn't working.

  3. #13
    Captain
    Join Date
    Apr 2018
    Posts
    699
    Quote Originally Posted by Dreamflight767 View Post
    I did do auto config. It just wasn't working.
    Yeah, just use the steps i outlined in my previous post.

    Seems like auto-config uses avr-tcp which doesn't really work.

  4. #14
    Passenger
    Join Date
    Dec 2013
    Posts
    30
    Quote Originally Posted by wiedehopf View Post
    Yeah, just use the steps i outlined in my previous post.

    Seems like auto-config uses avr-tcp which doesn't really work.
    Sweet that worked for my flightaware feed! Thank you so much. So now what about FR24. Any ideas?

  5. #15
    Captain
    Join Date
    Apr 2018
    Posts
    699
    Do the reconfigure with the values i outlined,
    after that you need to restart fr24feed:

    sudo systemctl restart fr24feed

    Then it should be working.

    (what do you think the sudo fr24feed --reconfigure was for? )
    Last edited by wiedehopf; 2019-04-16 at 15:32.

  6. #16
    Passenger
    Join Date
    Dec 2013
    Posts
    30
    Quote Originally Posted by wiedehopf View Post
    Do the reconfigure with the values i outlined,
    after that you need to restart fr24feed:

    sudo systemctl restart fr24feed

    Then it should be working.

    (what do you think the sudo fr24feed --reconfigure was for? )
    Sorry, just want to make sure I'm doing everything correctly.

    Are you referring to the reconfigure in post #9?

    If so, I did that and that's how I got my Flightaware feed back.

    So now, I just need to do restart of FR24feed?

    Thanks.

  7. #17
    Captain
    Join Date
    Apr 2018
    Posts
    699
    If you did the reboot in the second part of the post it should already be working.

    Let's see your config:

    cat /etc/fr24feed.ini

    Mine looks like this:
    Code:
    receiver="beast-tcp"
    fr24key="xxxxxxxxxxxxxxxx"
    host="127.0.0.1:30005"
    bs="no"
    raw="no"
    logmode="1"
    logpath="/var/log/fr24feed"
    mlat="yes"
    mlat-without-gps="yes"
    use-http=yes
    http-timeout=20
    (the http stuff at the end seems more reliable but it's not required)
    Last edited by wiedehopf; 2019-04-16 at 15:39.

  8. #18
    Passenger
    Join Date
    Dec 2013
    Posts
    30
    Quote Originally Posted by wiedehopf View Post
    If you did the reboot in the second part of the post it should already be working.

    Let's see your config:

    cat /etc/fr24feed.ini

    Mine looks like this:
    Code:
    receiver="beast-tcp"
    fr24key="xxxxxxxxxxxxxxxx"
    host="127.0.0.1:30005"
    bs="no"
    raw="no"
    logmode="1"
    logpath="/var/log/fr24feed"
    mlat="yes"
    mlat-without-gps="yes"
    use-http=yes
    http-timeout=20
    (the http stuff at the end seems more reliable but it's not required)
    How do I get to my config?

  9. #19
    Captain
    Join Date
    Apr 2018
    Posts
    699
    Yeah didn't quite make clear that it was a command you need to use:

    Code:
    cat /etc/fr24feed.ini
    This will show the configuration.

    Anyway what does

    fr24feed-status

    show?
    Maybe it's already working?

  10. #20
    Passenger
    Join Date
    Dec 2013
    Posts
    30
    pi@piaware:~ $ cat /etc/fr24feed.ini
    receiver="dvbt"
    fr24key="d58d8dbeb9f275d4"
    path="/usr/lib/fr24/dump1090"
    bs="no"
    raw="no"
    logmode="0"
    procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    logpath="/var/log"
    mlat="yes"
    mlat-without-gps="yes"
    pi@piaware:~ $
    pi@piaware:~ $ receiver="dvbt"
    pi@piaware:~ $ fr24key="d58d8dbeb9f275d4"
    pi@piaware:~ $ path="/usr/lib/fr24/dump1090"
    pi@piaware:~ $ bs="no"
    pi@piaware:~ $ raw="no"
    pi@piaware:~ $ logmode="0"
    pi@piaware:~ $ procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    pi@piaware:~ $ logpath="/var/log"
    pi@piaware:~ $ mlat="yes"
    pi@piaware:~ $ mlat-without-gps="yes"
    -bash: mlat-without-gps=yes: command not found
    pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ cat /etc/fr24feed.ini
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ receiver="dvbt"
    pi@piaware:~ $ fr24key="d58d8dbeb9f275d4"
    pi@piaware:~ $ path="/usr/lib/fr24/dump1090"
    pi@piaware:~ $ bs="no"
    pi@piaware:~ $ raw="no"
    pi@piaware:~ $ logmode="0"
    pi@piaware:~ $ procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    pi@piaware:~ $ logpath="/var/log"
    pi@piaware:~ $ mlat="yes"
    pi@piaware:~ $ mlat-without-gps="yes"
    -bash: mlat-without-gps=yes: command not found
    pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ receiver="dvbt"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ fr24key="d58d8dbeb9f275d4"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ path="/usr/lib/fr24/dump1090"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ bs="no"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ raw="no"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ logmode="0"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ procargs="Step 4.1 - Receiver selection (in order to run MLAT please use DVB-T stick with dump1090 utility bundled with fr24feed):"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ logpath="/var/log"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ mlat="yes"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ pi@piaware:~ $ mlat-without-gps="yes"
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ -bash: mlat-without-gps=yes: command not found
    -bash: -bash:: command not found
    pi@piaware:~ $ pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $ -bash: pi@piaware:~: command not found
    -bash: -bash:: command not found
    pi@piaware:~ $ pi@piaware:~ $
    -bash: pi@piaware:~: command not found
    pi@piaware:~ $

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •