Page 25 of 28 FirstFirst ... 152324252627 ... LastLast
Results 241 to 250 of 280

Thread: Windows Setup/Feed Migration (virtualVM) Assistance

  1. #241
    Passenger
    Join Date
    Jun 2019
    Posts
    20
    Quote Originally Posted by wiedehopf View Post
    There is an issue with network/internet connectivity.

    For diagnosis show the output of these commands:

    ping -c3 8.8.8.8

    ping -c3 ftp.debian.org

    cat /etc/resolv.conf
    There is no package loss in ping command & for this command:

    cat /etc/resolv.conf

    answer is :

    nameserver 192.168.1.1

  2. #242
    Captain
    Join Date
    Apr 2018
    Posts
    859
    If both pings worked, just try again.

    (The logs you posted indicated that your computer could not connect to ftp.debian.org)

    If there still is a problem, let's try googles DNS server with this command:

    Code:
    sudo sed -i -e '0,/nameserver/{s/nameserver.*/nameserver 8.8.8.8/}' /etc/resolv.conf
    Then try again:

    sudo apt update
    Last edited by wiedehopf; 2019-06-23 at 21:05.

  3. #243
    Passenger
    Join Date
    Jun 2019
    Posts
    20
    Quote Originally Posted by abcd567 View Post
    # FIRST OF ALL Add architecture armhf to use RPi armhf package on i386 / i686 / x86_64 PC:
    sudo dpkg --add-architecture armhf

    # NEXT UPDATE
    sudo apt update

    # LAST install dependencies
    sudo apt install gcc-6-base:armhf libc6:armhf libgcc1:armhf libstdc++6:armhf
    Still get this error:

    Unable to to locate gcc-6-base:armhf

  4. #244
    Passenger
    Join Date
    Jun 2019
    Posts
    20
    Quote Originally Posted by wiedehopf View Post
    If both pings worked, just try again.

    (The logs you posted indicated that your computer could not connect to ftp.debian.org)

    If there still is a problem, let's try googles DNS server with this command:

    Code:
    sudo sed -i -e '0,/nameserver/{s/nameserver.*/nameserver 8.8.8.8/}' /etc/resolv.conf
    Then try again:

    sudo apt update
    There in no change I still get this error:

    Unable to to locate gcc-6-base:armhf

  5. #245
    Captain
    Join Date
    Apr 2018
    Posts
    859
    The question is, did this work?

    sudo apt update

    You are on a Raspberry Pi, aren't you?
    Then you don't need those packages and are using a guide that's not meant for your device.

    Or which device exactly are you using?
    Last edited by wiedehopf; 2019-06-23 at 21:39.

  6. #246
    Passenger
    Join Date
    Jun 2019
    Posts
    20
    Quote Originally Posted by wiedehopf View Post
    The question is, did this work?

    sudo apt update
    yes

    when I type:

    cat /etc/resolv.conf

    answer is :

    nameserver 8.8.8.8

  7. #247
    Captain
    Join Date
    Apr 2018
    Posts
    859
    That's not what i asked for, is this command working:

    sudo apt update
    sudo apt dist-upgrade

    Or does it still say "Could not resolve"

    "could not locate" is a different error, please be precise.

  8. #248
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,850
    What is the output of following 2 commands?


    uname -a

    lscpu

  9. #249
    Passenger
    Join Date
    Jun 2019
    Posts
    20
    Quote Originally Posted by wiedehopf View Post
    That's not what i asked for, is this command working:

    sudo apt update
    sudo apt dist-upgrade

    Or does it still say "Could not resolve"

    "could not locate" is a different error, please be precise.
    after i type this sudo apt dist-upgrade command, its start to get some date and install it.

    after that, i type sudo apt update.

    and after that type:

    sudo dpkg --add-architecture armhf

    &

    sudo apt update

    and at last :

    sudo apt install gcc-6-base:armhf libc6:armhf libgcc1:armhf libstdc++6:armhf

    but still get this answer :

    E: Unable to locate package gcc6-base:armhf

    You are on a Raspberry Pi, aren't you?
    Then you don't need those packages and are using a guide that's not meant for your device.

    Or which device exactly are you using?
    no, I used oracle vm virtualbox to install Debian Stretch with Raspberry Pi Desktop as described in the first page of this topic.

  10. #250
    Captain
    Join Date
    Apr 2018
    Posts
    859
    It should work. Maybe you mistyped something?

    Code:
    sudo apt install gcc-6-base:armhf
    After the
    sudo apt update
    the package should be found.

    So sudo apt update worked fine this time? (no "unable to resolve" like on the picture?)
    Last edited by wiedehopf; 2019-06-23 at 22:07.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •