Announcement

Collapse
No announcement yet.

Data issue while trying to switch from windows to mac feeder software

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Data issue while trying to switch from windows to mac feeder software

    Hi guys,

    Due to the announcement that the windows client won't be supported anymore I'm trying to switch from a windows 10 PC to a mac to feed data via Basestation over the network.
    Feed is working on windows since years now, but on the mac it says that everything is connected but there are now data pushed at all.
    Please find below the configuration and the logs on windows and mac.

    I'm using the same settings on both machines (not copied, I generated both with the setup tool)

    Code:
    receiver="basestation"
    fr24key="XXXX"
    host="192.168.0.21:30006"
    bs="no"
    raw="no"
    logmode="1"
    mlat="no"
    mlat-without-gps="no"
    working windows log
    Code:
    [main][e]Could not create monitor file!
    [main][i]Reader thread started
    [time][i]Synchronizing time via NTP
    [master][i]Starting processing thread
    [reader][i]Initializing reader
    [reader][i]Connecting to SBS1 receiver on 192.168.0.21:30006
    [reader][i]Connected to the receiver, authenticating
    [reader][i]Authenticated, processing messages
    [httpd][i]Server started, listening on 0.0.0.0:8754
    [time][i]Time synchronized correctly, offset +0.0001 seconds
    [main][i]Feed Network client started
    [feed][i]Downloading configuration
    [feed][c]Interval: 5s
    [feed][c]Latitude: XXX.1065
    [feed][c]Longitude: XXX.3996
    [feed][c]GND: YES
    [feed][c]NonADSB: YES
    [feed][c]Timestamps: optional
    [feed][c]Max range AIR: 350.0nm
    [feed][c]Max range GND: 100.0nm
    [feed][i]defined 4 servers
    [stats][i]Stats thread started
    [feed][n]XXXX@185.218.24.23:8099/UDP
    [feed][n]connecting
    [feed][n]connected via UDP (fd 764)
    [feed][n]working
    [feed][i]sent 67 AC in 2 packets
    [feed][i]sent 76 AC in 2 packets
    [feed][i]sent 80 AC in 2 packets
    same config on mac, not getting aircraft data:
    Code:
    2019-03-23 10:48:58 | [main][i]FR24 Feeder/Decoder
    2019-03-23 10:48:58 | [main][i]Version: 1.0.18-8/generic
    2019-03-23 10:48:58 | [main][i]Built on Oct 18 2016 11:19:46 (macos_sierra_decoder_fix-fb83ad2.git/MacOSX/)
    2019-03-23 10:48:58 | [main][i]Copyright 2012-2016 Flightradar24 AB
    2019-03-23 10:48:58 | [main][i]http : // flightradar24.com
    2019-03-23 10:48:58 | [main][i]DNS mode: LIBC
    2019-03-23 10:48:58 | [main][i]Reader thread started
    2019-03-23 10:48:58 | [httpd][i]Server started, listening on 0.0.0.0:8754
    2019-03-23 10:48:58 | [time][i]Synchronizing time via NTP
    2019-03-23 10:48:58 | [master][i]Starting processing thread
    2019-03-23 10:48:58 | [reader][i]Initializing reader
    2019-03-23 10:48:58 | [reader][i]Connecting to SBS1 receiver on 192.168.0.21:30006
    2019-03-23 10:48:58 | [reader][i]Connected to the receiver, authenticating
    2019-03-23 10:48:58 | [reader][i]Authenticated, processing messages
    2019-03-23 10:49:01 | [time][i]Time synchronized correctly, offset -0.0020 seconds
    2019-03-23 10:49:01 | [main][i]Feed Network client started
    2019-03-23 10:49:01 | [feed][i]Downloading configuration
    2019-03-23 10:49:01 | [feed][c]Interval: 5s
    2019-03-23 10:49:01 | [feed][c]Latitude: XX.1065
    2019-03-23 10:49:01 | [feed][c]Longitude: XX.3996
    2019-03-23 10:49:01 | [feed][c]GND: YES
    2019-03-23 10:49:01 | [feed][c]NonADSB: YES
    2019-03-23 10:49:01 | [feed][c]Timestamps: optional
    2019-03-23 10:49:01 | [feed][c]Max range AIR: 350.0nm
    2019-03-23 10:49:01 | [feed][c]Max range GND: 100.0nm
    2019-03-23 10:49:01 | [feed][i]defined 4 servers
    2019-03-23 10:49:01 | [stats][i]Stats thread started
    2019-03-23 10:49:01 | [feed][n]XXXX@185.218.24.24:8099/UDP
    2019-03-23 10:49:01 | [feed][n]connecting
    2019-03-23 10:49:01 | [feed][n]connected via UDP (fd 10)
    2019-03-23 10:49:01 | [feed][n]working
    2019-03-23 10:49:31 | [feed][n]ping 1
    2019-03-23 10:49:32 | [feed][n]syncing stream result: 1
    2019-03-23 10:50:01 | [feed][n]ping 2
    2019-03-23 10:50:02 | [feed][n]syncing stream result: 1
    2019-03-23 10:50:31 | [feed][n]ping 3
    2019-03-23 10:50:32 | [feed][n]syncing stream result: 1
    Anyone an idea what's wrong here? I definitely don't see any issue and I'm already frustrated with the Linux stuff.
    Didn't got it running on a virtualized RPI image. Same result as on the mac.

    Any help is much appreciated!

    Thanks,
    phil

  • #2
    That is a 2016 version.

    Prior to Linux 19-6 the new basestation format could not be decoded.

    Probably the same for OSX version

    Unsure if works on OSX, but you can look into modesmixer



    Sent from my EML-L09 using Tapatalk
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

    Comment


    • #3
      Thanks for the hint, but the Mac version I just downloaded a day ago. That means the Mac is no alternative for Windows. Does anybody know if there is an update planned for Mac? As there wasn't any for almost three years I don't think so.
      Will have a look into modesmixer.

      Thanks for you help!

      Comment

      Working...
      X