Hello,
My FR24 raspi 3 + FlightAware Pro Stick Plus v1.0 configuration worked perfectly for several months, but a power outage destroyed the microSd.
I have reconfigured a new microSD card with the latest version of Stretch Lite and the latest FR24 repository (sudo bash -c "$ (wget -O - http://repo.feed.flightradar24.com/install_fr24_rpi.sh))
But I did not recognize the configuration ... And I'm a little lost to find the right configuration.
Here is what I get with the "FR24 Feeder status":
-------------------------------------------------- ------------
FR24 Link: Connected via UDP
FR24 Radar Code: T-LFOT17
Local IP (s): 192.168.1.28
Aircraft Tracked:
(ModeS & ADS-B) 0
Aircraft Uploaded: N / A
Receiver: beast, Connected
MLAT running: NO
-------------------------------------------------- ------------
The IP address is that of Raspi. For the Port I entered: 10000, but finally I have 0 Aircraft Tracked,
I tested everything from the antenna, the Raspi (with another) the FlightAware Stick has been replaced, and I still get 0 traffic ...
I repeated the reinstallation of the SD Card several times, but no result ...
Can you help me...
Thanks in advance.
Jacky
My FR24 raspi 3 + FlightAware Pro Stick Plus v1.0 configuration worked perfectly for several months, but a power outage destroyed the microSd.
I have reconfigured a new microSD card with the latest version of Stretch Lite and the latest FR24 repository (sudo bash -c "$ (wget -O - http://repo.feed.flightradar24.com/install_fr24_rpi.sh))
But I did not recognize the configuration ... And I'm a little lost to find the right configuration.
Here is what I get with the "FR24 Feeder status":
-------------------------------------------------- ------------
FR24 Link: Connected via UDP
FR24 Radar Code: T-LFOT17
Local IP (s): 192.168.1.28
Aircraft Tracked:
(ModeS & ADS-B) 0
Aircraft Uploaded: N / A
Receiver: beast, Connected
MLAT running: NO
-------------------------------------------------- ------------
The IP address is that of Raspi. For the Port I entered: 10000, but finally I have 0 Aircraft Tracked,
I tested everything from the antenna, the Raspi (with another) the FlightAware Stick has been replaced, and I still get 0 traffic ...
I repeated the reinstallation of the SD Card several times, but no result ...
Can you help me...
Thanks in advance.
Jacky
Comment