I just setup Raspian and installed PiAware and it works great, I then setup the ADSBExchange script and that worked too
I went through the config for FlightRadar but zero airfract tracked, and I got the following in the log
I played around with some settings and ended up with it set on beast-tcp looking at port 30002.
Now I have this
But still zero planes tracked...
Can someone point me in the direction of what the correct settings should be for a bone stock Raspian install with PiAware installed on-top?
I went through the config for FlightRadar but zero airfract tracked, and I got the following in the log
HTML Code:
2019-02-12 21:00:18 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:18 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:23 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:23 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:28 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:28 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:33 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:33 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:38 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:38 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:43 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:43 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:47 | [feed][n]ping 9 2019-02-12 21:00:48 | [feed][n]syncing stream result: 1 2019-02-12 21:00:48 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:48 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:53 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:54 | [reader][e]Could not connect to tcp://localhost:30005 2019-02-12 21:00:59 | [reader][i]Connecting to DVBT-TCP-BEAST-RAW receiver via (tcp://localhost:30005) 2019-02-12 21:00:59 | [reader][e]Could not connect to tcp://localhost:30005
Now I have this
HTML Code:
2019-02-12 21:05:53 | [feed][n]KAAP22@185.218.24.22:8099/UDP 2019-02-12 21:05:53 | [feed][n]connecting 2019-02-12 21:05:53 | info | Stopping ReceiverACSender threads for feed 2019-02-12 21:05:53 | info | Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.24:8099, feed: KAAP22, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true 2019-02-12 21:05:53 | info | Network thread connecting to 185.218.24.22:8099 for feed KAAP22 2019-02-12 21:05:53 | [feed][n]connected via UDP (fd 32) 2019-02-12 21:05:53 | [feed][i]Feed connected 2019-02-12 21:05:53 | [feed][n]working 2019-02-12 21:06:23 | [feed][n]ping 1 2019-02-12 21:06:24 | [feed][n]syncing stream result: 1 2019-02-12 21:06:53 | [feed][n]ping 2 2019-02-12 21:06:54 | [feed][n]syncing stream result: 1 2019-02-12 21:07:23 | [feed][n]ping 3 2019-02-12 21:07:24 | [feed][n]syncing stream result: 1 2019-02-12 21:07:53 | [feed][n]ping 4 2019-02-12 21:07:54 | [feed][n]syncing stream result: 1 2019-02-12 21:08:23 | [feed][n]ping 5 2019-02-12 21:08:24 | [feed][n]syncing stream result: 1 2019-02-12 21:08:53 | [feed][n]ping 6 2019-02-12 21:08:54 | [feed][n]syncing stream result: 1 2019-02-12 21:09:23 | [feed][n]ping 7 2019-02-12 21:09:24 | [feed][n]syncing stream result: 1 2019-02-12 21:09:53 | [feed][n]ping 8 2019-02-12 21:09:54 | [feed][n]syncing stream result: 1
Can someone point me in the direction of what the correct settings should be for a bone stock Raspian install with PiAware installed on-top?
Comment