Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 44

Thread: Receiver is online but not sending any data

  1. #21
    Passenger
    Join Date
    May 2017
    Location
    Brisbane, Australia
    Posts
    26
    Thanks, will do this and get back to you.

  2. #22
    Passenger
    Join Date
    May 2017
    Location
    Brisbane, Australia
    Posts
    26
    Here are the results:
    pi@raspberrypi:~ $ cat /var/log/fr24feed/fr24feed.log
    2019-01-19 06:33:39 | ______ _ _ _ _ _ _____ ___
    2019-01-19 06:33:39 | | ___|| |(_) | | | | | | / __ \ / |
    2019-01-19 06:33:39 | | |_ | | _ __ _ | |__ | |_ _ __ __ _ __| | __ _ _ __`' / /' / /| |
    2019-01-19 06:33:39 | | _| | || | / _` || '_ \ | __|| '__|/ _` | / _` | / _` || '__| / / / /_| |
    2019-01-19 06:33:39 | | | | || || (_| || | | || |_ | | | (_| || (_| || (_| || | ./ /___\___ |
    2019-01-19 06:33:39 | \_| |_||_| \__, ||_| |_| \__||_| \__,_| \__,_| \__,_||_| \_____/ |_/
    2019-01-19 06:33:39 | __/ |
    2019-01-19 06:33:39 | |___/
    2019-01-19 06:33:39 | [main][i]FR24 Feeder/Decoder
    2019-01-19 06:33:39 | [main][i]Version: 1.0.23-8/generic
    2019-01-19 06:33:39 | [main][i]Built on Oct 11 2018 18:27:28 (HEAD-3c696a7.git/Linux/static_armel)
    2019-01-19 06:33:39 | [main][i]Running on: pi24-raspbian9
    2019-01-19 06:33:39 | [main][i]Local IP(s): 192.168.0.7
    2019-01-19 06:33:39 | [main][i]Copyright 2012-2018 Flightradar24 AB
    2019-01-19 06:33:39 | [main][i]https://www.flightradar24.com
    2019-01-19 06:33:39 | [main][i]DNS mode: PING
    2019-01-19 06:33:39 | [main][i]Automatic updates are ENABLED
    2019-01-19 06:33:39 | ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded
    2019-01-19 06:33:39 | [httpd][i]Server started, listening on 0.0.0.0:8754
    2019-01-19 06:33:39 | [main][i]Reader thread started
    2019-01-19 06:33:39 | [master][i]Starting processing thread
    2019-01-19 06:33:39 | [reader][i]Initializing reader
    2019-01-19 06:33:39 | [main][i]Socket server started
    2019-01-19 06:33:39 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw --mlat)
    2019-01-19 06:33:39 | [main][i]MLAT data feed started
    2019-01-19 06:33:39 | [bs][i]Initializing server
    2019-01-19 06:33:39 | [reader][i]Connected to the receiver, configuring
    2019-01-19 06:33:39 | [reader][i]Configured, processing messages
    2019-01-19 06:33:39 | [bs][i]Starting server on 0.0.0.0:30003
    2019-01-19 06:33:39 | [mlat][i]Waiting for MLAT configuration
    2019-01-19 06:33:40 | [time][i]Synchronizing time via NTP
    2019-01-19 06:33:55 | [time][i]Time synchronized correctly, offset +7.0129 seconds
    2019-01-19 06:33:55 | [feed][i]Downloading configuration
    2019-01-19 06:33:55 | [main][i]Feed Network client started
    2019-01-19 06:33:55 | [feed][d]fetching configuration
    2019-01-19 06:34:04 | [time][w]Time jumped forward by 7.14s, resynchronizing
    2019-01-19 06:34:04 | [time][i]Synchronizing time via NTP
    2019-01-19 06:34:12 | [time][i]Time synchronized correctly, offset -0.0005 seconds
    2019-01-19 06:34:16 | [feed][i]configuring decoder
    2019-01-19 06:34:16 | [feed][c]Max range AIR: 350.0nm
    2019-01-19 06:34:16 | [feed][c]Max range GND: 100.0nm
    2019-01-19 06:34:16 | [feed][i]configuration changed
    2019-01-19 06:34:16 | [feed][i]defined 3 servers
    2019-01-19 06:34:16 | [feed][c]Timestamps: optional
    2019-01-19 06:34:16 | [stats][i]Stats thread started
    2019-01-19 06:34:16 | [feed][n]YBBN214@185.218.24.22:8099/UDP
    2019-01-19 06:34:16 | [feed][n]connecting
    2019-01-19 06:34:16 | info | Stopping ReceiverACSender threads for feed
    2019-01-19 06:34:16 | info | Configured ReceiverACSender: 185.218.24.22:8099,185.218.24.23:8099,185.218.24.2 4:8099, feed: YBBN214, send_interval: 5s, max age: 15s, send metadata: true, mode: 1, filtering: true
    2019-01-19 06:34:16 | info | Network thread connecting to 185.218.24.22:8099 for feed YBBN214
    2019-01-19 06:34:16 | [feed][n]connected via UDP (fd 16)
    2019-01-19 06:34:16 | [feed][i]Feed connected
    2019-01-19 06:34:16 | [feed][n]working
    2019-01-19 06:34:46 | [feed][n]ping 1
    2019-01-19 06:34:47 | [feed][n]syncing stream result: 1
    2019-01-19 06:35:16 | [feed][n]ping 2
    2019-01-19 06:35:17 | [feed][n]syncing stream result: 1
    pi@raspberrypi:~ $ cat /etc/modprobe.d/raspi-blacklist.conf
    blacklist rtl2832
    blacklist r820t
    blacklist rtl2830
    blacklist dvb_usb_rtl28xxu
    blacklist dvb_usb_v2

  3. #23
    Super Moderator
    Join Date
    May 2011
    Location
    T-NZCH1, PP:PH New Zealand
    Posts
    5,007
    Someone will need to confirm the startup logs of a working unit that
    2019-01-19 06:33:39 | ERROR: rmmod: ERROR: Module dvb_usb_rtl28xxu is not currently loaded

    is normal. Mine is tasked for something else at present.

    However all appears good. It's not force restarting the feeder.
    The Pings just indicate theres no signal/aircraft to upload.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  4. #24
    Passenger
    Join Date
    May 2017
    Location
    Brisbane, Australia
    Posts
    26
    Thank you again. i will see how it goes. As I mentioned, we are under the flight path for Brisbane. We should have several aircraft flying overhead over the next hour or so.

  5. #25
    Captain
    Join Date
    Apr 2018
    Posts
    750
    Quote Originally Posted by orechovnicek View Post
    fr24feed.ini
    Code:
    receiver="dvbt"
    fr24key="myKey"
    path="/usr/lib/fr24/dump1090"
    bs="no"
    raw="no"
    logmode="2"
    logpath="/var/log/fr24feed"
    mlat="no"
    mlat-without-gps="no"
    tail /var/log/fr24feed.log
    Code:
    2018-01-20 11:20:46 | [feed][c]GND: YES
    2018-01-20 11:20:46 | [feed][c]NonADSB: YES
    2018-01-20 11:20:46 | [feed][c]Timestamps: optional
    2018-01-20 11:20:46 | [feed][c]Max range AIR: 350.0nm
    2018-01-20 11:20:46 | [feed][c]Max range GND: 100.0nm
    2018-01-20 11:20:46 | [feed][i]defined 5 servers
    2018-01-20 11:20:46 | [feed][n]LKTB50@83.130.10.85:8099/UDP
    2018-01-20 11:20:46 | [feed][n]connecting
    2018-01-20 11:21:06 | [feed][n]connected via TCP (fd -1)
    2018-01-20 11:21:06 | [feed][n]working

    That looks good so far. Can you use cat instead of tail so more of the log is visible?

    You can add these two lines to /etc/fr24feed.ini

    use-http=yes
    http-timeout=10

    This fixes some intermittent upload problems that occured recently.

    @PeterWelly you can also add those two lines they improve uploading.
    But i get the impression your antenna is not working correctly so while the dongle is working fine there is just nothing to receive.

  6. #26
    Passenger
    Join Date
    Mar 2018
    Location
    Netherlands
    Posts
    6
    What's the result of the command:
    lsusb

  7. #27
    Captain abcd567's Avatar
    Join Date
    Sep 2013
    Location
    Toronto CYYZ
    Posts
    2,763
    @PeterWelly
    Which antenna, coax & connectors you use?
    Check for bad connections like loose connectors, rusting, moisture ingress etc.

  8. #28
    Passenger
    Join Date
    May 2017
    Location
    Brisbane, Australia
    Posts
    26
    The Antenna is just the small mag base one that came with the tuner. It is located on the roof with the no extension leads etc. Ant and tuner are both only 2 weeks old so connections are good.

  9. #29
    Passenger
    Join Date
    May 2017
    Location
    Brisbane, Australia
    Posts
    26
    I will try that and let you know the result.

  10. #30
    Passenger
    Join Date
    May 2017
    Location
    Brisbane, Australia
    Posts
    26
    Quote Originally Posted by SlashbNL View Post
    What's the result of the command:
    lsusb
    pi@raspberrypi:~ $ lsusb
    Bus 001 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
    Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
    Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    pi@raspberrypi:~ $

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •