Page 5 of 5 FirstFirst ... 345
Results 41 to 44 of 44

Thread: Receiver is online but not sending any data

  1. #41
    Join Date
    Nov 2016
    ... and he drinks lots of Coke too !! Requirement for more cantenna's ....


  2. #42
    Super Moderator
    Join Date
    May 2011
    T-NZCH1, PP:PH New Zealand
    Quote Originally Posted by Icosphere View Post
    2019-01-27 13:10:58 | [reader][i]Connecting to DVBT receiver via (exe:///usr/bin/dump1090-mutability --raw)
    2019-01-27 13:10:58 | [reader][i]Connected to the receiver, configuring
    2019-01-27 13:10:58 | [reader][i]Configured, processing messages
    2019-01-27 13:10:59 | [reader][i]Connection terminated
    2019-01-27 13:10:59 | [main][i]Terminating child process 806 with SIGTERM

    Any idea what I need to do to enable the receiver?

    2016-01-26 22:20:05 | [reader][i]Connecting to Generic receiver via (exe://*dump1090*  --raw)
    2016-01-26 22:20:05 | [reader][i]Connected to the receiver, authenticating
    2016-01-26 22:20:05 | [reader][i]Authenticated, processing messages
    2016-01-26 22:20:07 | [reader][i]Connection terminated
    2016-01-26 22:20:12 | [reader][i]Connecting to Generic receiver via (exe://*dump1090*  --raw)
    2016-01-26 22:20:12 | [reader][i]Connected to the receiver, authenticating
    2016-01-26 22:20:12 | [reader][i]Authenticated, processing messages
    2016-01-26 22:20:14 | [reader][i]Connection terminated
    Incorrect configuration set - Hardware not starting. Check for:
    - USB stick does NOT have the required Realtek RTL28xx chipset or Rafael Tuner
    - Conflicting software locking USB device to 'in-use'
    - Missing zadig driver installation step for windows (cannot read USB devices)
    - Error with additional commands causing Dump1090 to terminate
    - Dump1090 (or similar) already currently running
    - Windows detected and using wrong USB. Add: --device-index x
    I would suggest stopping all instances of fr24feed using the commands on that post.

    And run RTL_test to ensure it has the right tuner/detected and not already in use for a start.
    Posts not to be taken as official support representation - Just a helpful uploader who tinkers

  3. #43
    Join Date
    Aug 2013
    Rijeka, Croatia
    I just noticed my subscription went to Basic and then checked the feed and it says the same, Receiver is online but it's not sending data. On the same Raspberry and the same USB dongle there is also a Flightaware feeder which still normally works and sends data to FA. So something must have gone bad with fr24feed ? Did you guys solve that error?

  4. #44
    Join Date
    Apr 2018
    Try adding these two lines


    to /etc/fr24feed.ini

    also if the log is enabled you can check /var/log/fr24feed.log for errors.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts